Why do I get nothing when I push the start button?
BTW, it’s very easy to goof up that little clutch safety switch when you take the control housings apart, which I assume you did when you put the grips on. If you don’t hear the solenoid click when you press the start button and you have a fully charged battery, it’s either the start relay, the solenoid or a bad wire.
What does it mean when a fuse is blown?
Yet people commonly use the expression “blown fuse” to describe just about any unexpected electricity-related occurrence, especially one involving a loss of power. A “blown fuse” can mean many different things–several of which have little to do with actual fuses.
What happens when you push the start button on a Harley Davidson?
There’s a connector plugged into the top of the starter, green wire. Unplug the connector and probe it for B+ while pushing the start button. If it shows volts the start button is good. Then take a jumper wire from the battery positive terminal to that same connector plug on the starter, the starter should spin and engage the engine (crank over).
How often do you get a blown fuse?
Most people probably have experienced a blown fuse at one time or another. Someone always knows what to do when this happens. If you’re a homeowner, that person probably is you. Blown fuses are a common occurrence.
BTW, it’s very easy to goof up that little clutch safety switch when you take the control housings apart, which I assume you did when you put the grips on. If you don’t hear the solenoid click when you press the start button and you have a fully charged battery, it’s either the start relay, the solenoid or a bad wire.
Why does my dryer not start when I push the start button?
You push the start button-and nothing happens. First, make sure the door is shut tight. If the dryer still doesn’t start, there are several possible reasons, from a door switch that’s not recognizing that the door is closed to a failure in the main electronic control board.
There’s a connector plugged into the top of the starter, green wire. Unplug the connector and probe it for B+ while pushing the start button. If it shows volts the start button is good. Then take a jumper wire from the battery positive terminal to that same connector plug on the starter, the starter should spin and engage the engine (crank over).
Why does my washing machine not turn on?
If the fuse is blown, replace it and try the washer to see if it works. The problem could be with the door interlock. If the lights come on but the machine won’t start, this will probably be the cause. This could either be the wiring that runs to the door interlock, or the door catch not activating the interlock itself.