How do you change the fuel pump on a Harley Davidson?
The filter on an early bike can simply be changed by removing the petcock from the tank. Before messing with the fuel tank and pump, the whole fuel injection system needs to be purged of fuel pressure to avoid any unwanted fuel spills, though the tank does not have to be emptied or removed.
When to replace fuel filter on Harley Davidson?
Not only is regular replacement of the fuel filter part of your bike’s basic maintenance needs, but filter replacement will also allow for inspection or replacement of the in-tank fuel lines and fuel pump assembly. A clogged filter can hinder engine performance to the point that the bike may become unrideable.
What kind of filter does a Harley Davidson Electra Glide use?
Made from aircraft-quality aluminum, the filter is removable, cleanable element for years of service and features an O-ring that seals body for no leaks. HSR Carburetor Easy Kit by Mikuni®.
How can I get my fuel pump to run?
Swap an accessory fuse wuth the ignition fuse and give it a whirl. also if I use a “power probe” and apply battery voltage to the fuel pump fuse the fuel pump does run. thanks nipplesurfer, I did try that yesterday.
How do you remove a fuel pump on a Harley?
Harley fuel pump and filter removal is a project you can do with ease. Bob LaRosa and Mark DiPietro take the time to cover all painted areas, drain fuel from the system and use the right tool to remove the pump and filter from the tank. JIMS Tools available at DennisKirk.com – See the JIMS Fuel Pump Retainer Remover Tool on DennisKirk.com.
Not only is regular replacement of the fuel filter part of your bike’s basic maintenance needs, but filter replacement will also allow for inspection or replacement of the in-tank fuel lines and fuel pump assembly. A clogged filter can hinder engine performance to the point that the bike may become unrideable.
What causes a fuel pump to stop working?
While modern gasoline is highly refined and quite clean, occasionally contaminants do get into the tank and get stopped by the fuel filter element. The filter can become clogged, and the pump has to work harder when that happens, which can cause premature failure.
Swap an accessory fuse wuth the ignition fuse and give it a whirl. also if I use a “power probe” and apply battery voltage to the fuel pump fuse the fuel pump does run. thanks nipplesurfer, I did try that yesterday.
How does fuel injection work on a Harley Davidson?
Your fuel injected Harley Davidson touring bike needs a proper supply of presureized fuel to run properly. And much like air filters cleanse the air as it enters the engine, fuel filters strain any unwanted contaminants from the fuel before it is plumbed to the fuel injection system.
Can a clogged filter make a Harley Davidson unrideable?
A clogged filter can hinder engine performance to the point that the bike may become unrideable. This article applies to Harley-Davidson Touring (2000-2015). Your fuel injected Harley Davidson touring bike needs a proper supply of presureized fuel to run properly.
Your fuel injected Harley Davidson touring bike needs a proper supply of presureized fuel to run properly. And much like air filters cleanse the air as it enters the engine, fuel filters strain any unwanted contaminants from the fuel before it is plumbed to the fuel injection system.
A clogged filter can hinder engine performance to the point that the bike may become unrideable. This article applies to Harley-Davidson Touring (2000-2015). Your fuel injected Harley Davidson touring bike needs a proper supply of presureized fuel to run properly.
What to do when you run out of fuel?
Depress the tab on the bottom of the fuse box lid to open the box. Following the fuse diagram, remove the fuel pump fuse. With the fuse removed, start the engine to relieve fuel pressure. The engine will stall within a few seconds once it runs out of fuel. Figure 1. Remove saddle bag and side cover. Figure 2. Fuse box.
The filter on an early bike can simply be changed by removing the petcock from the tank. Before messing with the fuel tank and pump, the whole fuel injection system needs to be purged of fuel pressure to avoid any unwanted fuel spills, though the tank does not have to be emptied or removed.
Are there any Harley fuel lines left on Amazon?
. Only 12 left in stock – order soon. . Only 12 left in stock – order soon. . Only 12 left in stock – order soon. . Only 16 left in stock – order soon. . Only 7 left in stock – order soon. . Only 7 left in stock – order soon. . Only 11 left in stock – order soon.
What causes fuel line to rub on inside of tank?
The pressure regulator bypasses all un-needed pressure/fuel back into the tank. You could have a rub hole in your internal fuel line. Not a crack, but a rub hole, from the fuel line rubbing on the inside of the tank. You will see the rub spot as a place where the line has 2 or 3 small dark spots in a row, on the line ribs.
Can a gas tank be removed from a Harley Davidson?
We have done many projects in the Law Abiding Biker garage that required us to remove the fuel tank, so we wanted to show you how. Check out our Harley gas tank removal with front cross-over line video! Need a motorcycle cell phone or GPS mounting solution Bikaholics?
What kind of fuel injection does a Delphi motorcycle use?
For 2006 HD Dyna model bikes and all 2007> later HD motorcyles, the Delphi fuel injection now operates in closed loop mode with a pair of narrow band O2 sensors. The NBO2 sensors control the fuel mixture when idling and cruising.
When did Delphi start using fuel injection on V twins?
You can be sure that it will not be many years before all V-twins have fuel injection as standard equipment. For 2006 HD Dyna model bikes and all 2007> later HD motorcyles, the Delphi fuel injection now operates in closed loop mode with a pair of narrow band O2 sensors.
What kind of fuel lines do I Need?
Check out the great fuel lines we have available to ship to you today, include Chevy truck fuel lines, GMC fuel lines and more! Please feel free to contact us at anytime to have any and all of your questions answered.
Why are fuel lines pre bent and ready to install?
All of our fuel lines are pre-bent and ready to install, so that your installation process becomes that much easier, and that much less time consuming.
Are there any fuel lines that ship the same day?
We offer same-day shipping in order to better serve you, so that the next time you need a fuel hose, you know exactly where to go for immediate relief. Check out the great fuel lines we have available to ship to you today, include Chevy truck fuel lines, GMC fuel lines and more!
Where can I buy bent fuel line hoses?
When you shop for all of your fuel line needs online at Lines-To-Go, you will soon realize that we have all of the pre bent fuel line and hose parts that you need to repair or replace the old with the new.
Is there a problem with my fuel pump?
The first mile I drive there is no problem, but then it starts to sputter and act like a clogged filter. It idles fine. I removed the fuel pump and checked the lines and the filter sock. No visible cracks and the sock was clean. I replaced the gas and added injector cleaner but problem still exists. New plugs installed too.
How to replace a fuel filter on a Harley Davidson?
DIY Replacing a Harley Davidson Fuel pump, Fuel filter, and Fuel Pressure Regulator. – YouTube DIY Replacing a Harley Davidson Fuel pump, Fuel filter, and Fuel Pressure Regulator.
Do you need to replace the fuel line on a Harley?
You will need new gaskets, filter, and cover bolts. Take your time and do not force anything or yank anything in the Harley fuel tank. You do not want to bend or break anything. Cover painted pieces to avoid unwanted paint damage. This video is also valuable if you have to replace your fuel supply line.