Can you kick start without key?
Yes. Just disconnected the electrical clamp from the ignition switch. And all you need is a piece of wire, connect positive and negative of the clamp on harness side.. and the bike will start with kick.
What to do if your car starts cranking without a key?
I run outside and the start is cranking this time out of no where. Jump in the truck, put in the key turn to on and the truck starts but the starter continues to crank turn off the ignition and the start continues to run pull the positive terminal but only after the battery is fully drained.
Why is my starter cranking without the ignition key?
While putting it in I connected the ground then connected the positive (read different things about which to connect first, please advise) but when I touched the positive terminal to the battery the starter began to crank! Went inside to check and the key wasn’t even in the ignition.
Can you start a truck with a key in ignition?
Starting the truck with key in the ignition and just connecting the wire harness at the starter, then disconnecting to kill the starter. He spent about 15 minutes testing the tumbler with the harness disconnected. Then put it back together and started pulling the remote starter wires.
Why do I Hear No crank when I start my car?
Problems may show up as a no-crank or slow-cranking condition, caused by a worn-out component, a bad electrical connection, or an undercharged or failed battery.
I run outside and the start is cranking this time out of no where. Jump in the truck, put in the key turn to on and the truck starts but the starter continues to crank turn off the ignition and the start continues to run pull the positive terminal but only after the battery is fully drained.
While putting it in I connected the ground then connected the positive (read different things about which to connect first, please advise) but when I touched the positive terminal to the battery the starter began to crank! Went inside to check and the key wasn’t even in the ignition.
What does no start no crank no click mean?
If you have a late model GM vehicle and turn the key only to hear nothing, you’ll most likely think you have a dead battery—and you may. But a no start, no crank, no click condition can be far more involved than that. In the old days, power flowed through the ignition switch and down to the starter solenoid. Not anymore.
Starting the truck with key in the ignition and just connecting the wire harness at the starter, then disconnecting to kill the starter. He spent about 15 minutes testing the tumbler with the harness disconnected. Then put it back together and started pulling the remote starter wires.