How to check the fault code on a Yamaha?
To enter the diagnostic mode and check the existing error codes in memory, do the following: 1. Turn off the ignition, the engine stop button to put in the ON position. 2. Disconnect the fuel pump connector. 3. Simultaneously press SELECT + RESET on the dashboard and not let go. 4.
What to do if check engine light is on but no code?
Check the make and model of your reader to see what it is built for and if all else fails, head into a parts store and they should be able to read the issue at no cost to you. No code being generated on the reader does not mean the driver is in the clear.
How to turn off diagnostic mode on a Yamaha?
Login process in diagnostic mode: 1. Switch off ignition. Disable button Start / Stop Engine (red on the right panel). 2. Press both buttons on and keep them tidy. 3. Turn the ignition, hold the button after the ignition is about 8 seconds. 4.
To enter the diagnostic mode and check the existing error codes in memory, do the following: 1. Turn off the ignition, the engine stop button to put in the ON position. 2. Disconnect the fuel pump connector. 3. Simultaneously press SELECT + RESET on the dashboard and not let go. 4.
Check the make and model of your reader to see what it is built for and if all else fails, head into a parts store and they should be able to read the issue at no cost to you. No code being generated on the reader does not mean the driver is in the clear.
Login process in diagnostic mode: 1. Switch off ignition. Disable button Start / Stop Engine (red on the right panel). 2. Press both buttons on and keep them tidy. 3. Turn the ignition, hold the button after the ignition is about 8 seconds. 4.
What is the Diagnostic Code on a Yamaha WaveRunner?
If you don’t see your code here, then you’ll need to buy a Yamaha Diagnostic System (YDS) on eBay for around $125. In my case, I had engine warning code 19 indicating incorrect battery voltage.
Why is my Yamaha FZ6 in diagnostic mode?
Let’s take a look at Diagnostic mode and the fault/diagnostic codes for my 2007 Yamaha FZ6 (also works for Yamaha FZ1). I got slapped with a code 19 recently and didn’t know about diagnostic mode. The Code 19 is a common issue which usually results from a faulty sidestand switch or sidestand switch connection to the main wiring harness.