Why does my chain get loose then tight?
Re: tight then loose Chain Could be: bent crank, over stretched chain, misaligned chain, off center chainwheel, tweaked rear hub, bad freewheel. Most likely is an off center chainwheel: Remove the chain and check how far the chainwheel moves front to back, like you are truing a wheel with a hop in it.
What does it mean when your chain pops?
It might be that the chain is worn, has a stiff or bent link, or has become clogged up with dirt. A visual inspection while turning the cranks should reveal if there’s a problem here. The chainring, or a chainring tooth, could be bent. Again, a visual check will tell you what you need to know.
Why does my chain feel loose?
Your chain might simply be too old or can stretch over time. When this occurs you need to replace it. Consider that your loose chain also may be due to operator error. Exceeding the recommended gear range for the rear derailleur on your bike may lead to a droopy chain when you ride in these gears.
Why is my chain so noisy?
If your chain is dry, dirty, or rusted, binding can be occurring in the rollers of your chain, causing squeaking or even jumping over the teeth in your cassette and chain rings. If your chain seems to be moving freely, then it could be dirty or seized bearings in your derailleur jockey wheels (or chain guide pulley).
Why does my pedal click?
A bent derailleur hanger, or one that is out of alignment, can cause a constant clicking sound while pedaling. The derailleur hanger might be visibly bent or off if it’s bad enough. Sometimes a creaking noise can occur from the derailleur hanger rubbing against the frame where it’s mounted.
What can I do about chain clicking noise?
Try and halve the problem and then see which side the symptom goes to. BTW remember to relube chain once you reassemble.
Why does my chainsaw chain keep coming loose?
This is probably the most common reason that a chainsaw will start tight, and then get loose. This is particularly common when you store your chainsaw in cool temperatures. Then, even if you do a perfect job tightening it, you’ll probably have to tighten it again after running the chainsaw awhile.
What are the effects of loose chain tension?
So the sole reason for this article is to elucidate about the right chain tension and the effects of a loose/tight chain. Precise Chain Tension: The chain of your motorcycle needs to be in a precise tension so that it doesn’t knock off while riding or creates wear and tear to the Sprockets.
What are the effects of a loose chain on a motorcycle?
One amongst them is the amount of tension, the chain carries. The point here is the that a tight chain or a loose chain, both would cause serious trouble to the motorcycle. So the sole reason for this article is to elucidate about the right chain tension and the effects of a loose/tight chain.
Try and halve the problem and then see which side the symptom goes to. BTW remember to relube chain once you reassemble.
Why does my bike chain keep making noise?
There are many reasons why your chain might be making noise, jumping around, or causing excessive vibration. Here are four common causes. Yeah, this is probably the reason. People don’t replace their bike chain nearly as often as they should. Chains stretch over time, which causes them to move around more, both horizontally and laterally.
What makes the clicking noise when chain touches the cassette?
This is the correct answer. For anyone who doesn’t see it, look very close at the point where the chain first touches the cassette, at 00:15 to 00:17 of the video posted. You can clearly see the chain catch the ramp of the next highest sprocket, then drop back onto the correct sprocket again, creating the problematic noise.
What are the effects of a tight chain?
Effects Of A Tight Chain: * Very high wear and tear for the sprockets and chain. * Chances of breaking the chain is very high, which might result in a harm for other parts of the motorcycle and the rider as well. * Reduced suspension travel due to the high amount of tension.