Can a rectifier cause no charge?
In both kinds of engines, the battery will die eventually because the lack of a rectifier will mean that the alternator is not charging the it. Eventually the engine will not start. You’ll probably notice that the battery is going flat and having a hard time cranking the engine first though.
Why is my rectifier not working?
Other common causes for regulator rectifier failure involve the battery. If the link is bad and the voltage is faulty, this can cause the regulator rectifier to run hotter than usual. Things like poor grounding, a loose or weak battery, and a worn battery connection can all lead to regulator rectifier failure.
Can a bad stator damage a rectifier?
Registered. To answer your question yes it can, there are three diodes(phases) within the rectifier that allow current to go in one direction through the device (ie. Stator > Rectifier > Battery). But will not allow currrent to flow in the opposite direction.
What should the voltage be for a stator Charger?
A good rule of thumb is you can convert to power by multiplying the stator amps ( current) x the battery ( voltage ). You can use 13 as a good all around battery voltage. That is a good healthy battery staying charged just above 12 volts. Example only: Let’s say the stator is rated for 10 amps x 13-volt battery: 10 x 13=130 watt charging system.
Why is the regulator on my Harley stator not working?
The regulator protects the battery voltage and when the battery voltage climbs too high it shuts off current to ground and bleeds it off as heat. That is what the heat fins on the regulator box are for, to dissipate the heat. If the regulator did not monitor the voltage to your battery it would destroy it.
How does the rectifier work on a Harley Davidson?
The rectifier is responsible for converting the alternate current (AC) current created by the stator to direct current (DC). Basically, it chops off the negative polarity portion of the current that the battery can’t use. Then it passes the current to the battery.
Can a motorcycle run without a stator battery?
All the current required to run your motorcycle comes from your battery. The stator system charges your battery and replenishes it. You could actually run your motorcycle just fine for some time without a working stator as the battery has reserve current. Of course, the battery would eventually die.
A good rule of thumb is you can convert to power by multiplying the stator amps ( current) x the battery ( voltage ). You can use 13 as a good all around battery voltage. That is a good healthy battery staying charged just above 12 volts. Example only: Let’s say the stator is rated for 10 amps x 13-volt battery: 10 x 13=130 watt charging system.
The regulator protects the battery voltage and when the battery voltage climbs too high it shuts off current to ground and bleeds it off as heat. That is what the heat fins on the regulator box are for, to dissipate the heat. If the regulator did not monitor the voltage to your battery it would destroy it.
All the current required to run your motorcycle comes from your battery. The stator system charges your battery and replenishes it. You could actually run your motorcycle just fine for some time without a working stator as the battery has reserve current. Of course, the battery would eventually die.
The rectifier is responsible for converting the alternate current (AC) current created by the stator to direct current (DC). Basically, it chops off the negative polarity portion of the current that the battery can’t use. Then it passes the current to the battery.