Can a timing belt be changed on a SOHC engine?
The process to change the timing belt is the same on either engine type. Both engines are freewheeling engines, which means that should the belt stretch more than the tensioner can handle, the valves most likely will not slam into the pistons, causing extensive engine damage. Replace Timing Belt in 1998 Dodge Startus with 2.0 Liter SOHC Engine
What happens when your timing belt gives up the ghost?
Your engine’s timing belt is the most important maintenance item in your car. What happens when this component gives up the ghost, and how hard is it to fix by yourself? What Is A Timing Belt? A timing belt is the ribbed belt that is placed in a specific configuration along one side of your engine to keep the crank and camshafts timed properly.
Can a crank pulley be removed from a timing belt?
The crank pulley is the main pulley at the bottom of the engine. It needs to be removed in order to change the timing belt. However, it’s not easy if you only have hand tools, since the torque on this bolt is often pretty extreme.
What happens when you loosen a serpentine belt?
If your vehicle uses the alternator bracket to apply tension to the belt, loosen the two bolts that pass through the long eyelets on the bracket. As you loosen the bolts, the tension on the belt will likely move the alternator toward the engine and relieve the pressure. Loosen the bolts enough to move the alternator, but don’t remove them.
What happens if the accessory drive belt breaks?
If this accessory drive belt (also called a V-belts or serpentine belts) breaks, the battery won’t get charged, the air conditioner won’t blow cold air and the power steering will go out. In addition, if the belt drives the water pump, the engine could overheat.
Where is the accessory drive belt on a car?
Most vehicles have a rubber belt on the front of the engine that drives accessories such as the air-conditioning compressor, power steering pump and alternator. If this accessory drive belt (also called a V-belts or serpentine belts) breaks, the battery won’t get charged,…
Why is my serpentine drive belt not working?
This could be due to a slippage or misalignment. The only way to make the noise go away is to contact a professional mechanic and have them replace the serpentine/drive belt or diagnose the issue. 2. Power steering and AC not working
What causes an old AC belt to snap?
Old belts will snap simply because they are weakened by age and service. You can notice that a belt has snapped because the AC will not function when activated. A quick visual inspection of the belt should be able to identify if it has broken and needs to be replaced.