Is it possible to retract a Mitsubishi rear view mirror?
After turning the ignition switch to the “LOCK” position or putting the operation mode in OFF, it is possible to retract and extend the mirrors using the mirror retractor switch for about 30 seconds. • It is possible to retract and extend the mirrors by hand.
Why is my mirror control switch not working?
Many vehicle owners simply forget to check the switch to see if it’s set in this position. If the mirror control switch is not in the neutral or lockout position and your mirrors do not adjust at all, then the switch could have an open circuit internal to the switch. This means that no power can flow through the switch to the mirror motors.
When to use the outside rear view mirror?
The outside rear-view mirrors can be operated when the ignition switch or the operation mode is in ON or ACC. • Do not attempt to adjust the rear-view mirrors while driving. This can be dangerous. Always adjust the mirrors before driving. • Your vehicle is equipped with convex type mirrors.
Why does my car mirror not adjust from top to bottom?
In some cases the mirrors will adjust from top to bottom, but when the driver tries to adjust them sideways, the mirror does not move. This is commonly caused by either an electrical malfunction inside the switch or an issue between the switch and the electrical relay that sends a signal to the motor that operates the mirror.
Where is the outside mirror on a Mitsubishi?
The outside mirror can be folded in towards the side window to prevent damage when parking in narrow areas. • Do not drive the vehicle with the mirror folded in. The lack of rearward visibility normally provided by the mirror could lead to an accident. Push the mirror towards the back of the vehicle with your hand to retract it in.
How do you change the position of the rear view mirror?
1. Place the lever (A) to the same side as the mirror whose adjustment is desired. 2. Press the switch (B) to the left, right, up or down to adjust the mirror position. 3. Return the lever (A) back to the middle position (•).
What are the symptoms of a bad mirror control switch?
1. Mirrors adjust up and down but not left to right 2. Mirrors adjust side to side but not up and down 3. Mirrors do not adjust at all 4. Mirrors adjust from the master (driver) switch but not the slave (passenger) switch
Why does my electric mirror not adjust side to side?
Mirrors adjust side to side but not up and down. These two symptoms of inconsistent operation of the electric mirror are similar in nature but can have different root causes. The mirror switch has several sets of electrical contacts inside them where corrosion can build up, causing a faulty circuit inside the switch.