How to install LED light bar on Mitsubishi Triton?
The ultimate finishing touch to any professional install, our Mitsubishi specific switches will fit directly into the factory switch blanks of your MQ or MR Triton. Just like the genuine LED light bar optional accessory from Mitsubishi dealers, installation of LED light bar in combination with Nudge Bar will reduce front camera view where fitted.
What kind of wire to use for LED light bar?
Use marine grade or IP-rated connectors and you can forgo tape and caulking to seal splices. Wire ties help route wiring under the hood and inside the cab. Testing the LED Light Bar Connect your light bar directly to the vehicle battery or another DC voltage source as soon as you open the box.
What do you need to put light bar on?
Vise-locks or C-clamps can hold the light bar in position when marking holes. For light bar wiring, you need a pair of wire cutters, wire strippers and the correct crimpers for the connectors you choose.
How to install an LED bar on a grill?
How to Install LED Light Bar Mounts 1 Stud Mounting. Smaller light bars are often mounted within the vehicle grill or under the bumper in the case of fog lamps. 2 End Brackets. 3 Channel Brackets. 4 LED Lights Mounting Bars. 5 Original Equipment Brackets. …
How do you connect a light bar to a battery?
Connect the light bar’s red wire to the positive side of the battery or power supply and the black wire to the negative terminal. If the light does not work, you need to take care of this problem before continuing with the installation.
Use marine grade or IP-rated connectors and you can forgo tape and caulking to seal splices. Wire ties help route wiring under the hood and inside the cab. Testing the LED Light Bar Connect your light bar directly to the vehicle battery or another DC voltage source as soon as you open the box.
Can a light bar be connected to an AC current?
Tip: Never connect your LED light bar to AC current as it will damage it. Connect the light bar’s red wire to the positive side of the battery or power supply and the black wire to the negative terminal.
How to Install LED Light Bar Mounts 1 Stud Mounting. Smaller light bars are often mounted within the vehicle grill or under the bumper in the case of fog lamps. 2 End Brackets. 3 Channel Brackets. 4 LED Lights Mounting Bars. 5 Original Equipment Brackets.