What is the GM brake recall?
General Motors is recalling an additional 14,620 trucks and SUVs because their brakes may suddenly become difficult to use, according to the National Highway Traffic Safety Administration (NHTSA).
Why is my service brake assist on?
This message displays if there is a problem with the brake system. Restart the vehicle and check for the message on the DIC display. If the message displays immediately or again after you begin driving, the brake system needs service.
How to reset the parking brake on a GMC Truck?
Chevy GMC Truck Parking Brake Lever Pedal ResetThis is what you need to do to Reset the automatic ratching pedal that is inside the car. On this one the cabl… Chevy GMC Truck Parking Brake Lever Pedal ResetThis is what you need to do to Reset the automatic ratching pedal that is inside the car.
What causes a soft brake pedal on a Chevy?
Soft or Spongy Brake Pedal: Too much air in the system due to improper bleeding is usually the cause of this problem. However, it can also be due to fluid loss or a low fluid level. Bleed the brake lines as recommended by Chevy to fix this. You could also have a ballooning brake hose when the brakes are applied.
What causes brake fluid to go down in a Chevy?
Even with proper maintenance, you may find yourself with an unexpected brake problem — here are some of the most common examples. Low Brake Fluid: Your Chevy may develop a leak in the system that will result in the fluid level going down.
How do you know if your Chevy has a brake problem?
You will find the booster between the master cylinder and the firewall in your engine compartment. A check valve that is faulty can also let vacuum bleed out. You can diagnose this by starting your Chevy in order to build vacuum, and then turning it off for four or five minutes. Then you should try the brakes.
When to troubleshoot a GMC ABS brake system?
Instead, the ABS system will pump the brakes to provide better control over the vehicle for the driver. If you suspect you are having trouble with the GMC ABS brake system, you should troubleshoot the problem to verify whether there is a failure in the system. Open the fuse panel underneath the dash.
Chevy GMC Truck Parking Brake Lever Pedal ResetThis is what you need to do to Reset the automatic ratching pedal that is inside the car. On this one the cabl… Chevy GMC Truck Parking Brake Lever Pedal ResetThis is what you need to do to Reset the automatic ratching pedal that is inside the car.
What’s the problem with my GM Silverado brakes?
The problem came back after both times from the mechanic. He says he found no problems. 😐 The brakes will feel high and firm one day, then another day they will be low and soft. I do not have to push the pedal hard to get braking, it just goes down too far.
Why does my abs not work on my Silverado?
Here is how to fix spongy brake pedal feel on a 1988 to 1998 Chevrolet Silverado truck. If your truck has an antilock brake module in it, and that ABS module has air bubbles in it, you will have spongy squishy brake pedal feel even if your ABS system isn’t working. In my case, the brakes were so bad that the brake warning light came on.