What to do if your Mitsubishi warning lamp is not working?
If the warning lamp illuminates while the engine is running, turn the engine off and contact your nearest authorized MITSUBISHI dealer for inspection. (1) If this lamp illuminates when the engine oil level is not low, contact your nearest authorized MITSUBISHI dealer for inspection.
What to do if your engine warning light is on?
If it illuminates while the engine is running, the oil pressure is too low. If the warning lamp illuminates while the engine is running, turn the engine off and contact your nearest authorized MITSUBISHI dealer for inspection.
What does an indicator light on a Mitsubishi do?
In this case, immediately park your vehicle in a safe place and contact your nearest authorized MITSUBISHI dealer. This lamp is a part of an onboard diagnostic system which monitors the emissions, engine and automatic transmission control systems. If a problem is detected in one of these systems, this lamp illuminates or flashes.
Why does the indicator light go out when the engine is running?
The oil level must be checked using the dipstick. The indication lamp illuminates when the ignition switch is in the “ON” position. As the glow plug becomes hot, the lamp goes out and the engine can be started. If the warning lamp illuminates while the engine is running, it is possible that the engine is overheated.
When do the warning lights go out on a Mitsubishi?
Each symbol is explained along with the appropriate action to take when a warning light is displayed on the dashboard. Select your Mitsubishi vehicle from the list below. As part of a self-check, many warning light illuminate when the ignition is switched on and should go out shortly after.
Where is the airbag scanner on a Mitsubishi Lancer?
Plug the Mitsubishi airbag scanner into the OBD2 port under the dashboard, driver’s side. Turn on the ignition and allow the scanner to power on. Select your Mitsubishi model and year. For example, in 2017, Lancer. Select SRS / Airbag Control unit from the main menu. Select Read Fault Codes.
How to troubleshoot Mitsubishi SRS airbag warning light?
Turn on the ignition and allow the scanner to power on. Select your Mitsubishi model and year. For example, in 2017, Lancer. Select SRS / Airbag Control unit from the main menu. Select Read Fault Codes. Write down all the codes and also make sure they are NOT PRESENT.
If it illuminates while the engine is running, the oil pressure is too low. If the warning lamp illuminates while the engine is running, turn the engine off and contact your nearest authorized MITSUBISHI dealer for inspection.