What to expect in a 2008 Mitsubishi Lancer GTS?
Volume of both the guidance and the audio system can be made speed sensitive to compensate for road and wind noise. Sitting in the 2008 Mitsubishi Lancer GTS for the first time, the impression is that the car seems quite comprehensively equipped for its class.
What kind of spring does Lancer GTS use?
TEIN S.TECH Spring is an excellent step towards suspension tuning. They offer approximately a 1.5 inch drop for a more aggressive appearance. Comes with a 1 year limited warranty. Spring length is guaranteed not to sag more than 5mm and to be clear of any manufacture defects…
When to check tire alignment in Lancer GTS?
After installing an Eibach Pro-Kit or Sportline spring set, your vehicle’s alignment should always be checked. Once lowered, a wheel’s camber may become “increasingly negative”, meaning that the top of the tire is angled inward.
Can you upgrade the stereo on a Mitsubishi Lancer?
The next generation of Lancer changed quite a bit with the dashboard and stereo. These changes make Lancer stereo upgrades a little more difficult, but the wiring remains fairly simple. In order to upgrade your Lancer stereo, you’ll need to remove the front fascia as the previous generation.
Volume of both the guidance and the audio system can be made speed sensitive to compensate for road and wind noise. Sitting in the 2008 Mitsubishi Lancer GTS for the first time, the impression is that the car seems quite comprehensively equipped for its class.
Is the Mitsubishi Lancer a good car to buy?
The Lancer 2008 is a piece of art, an intelligent design, affordable and competitive. I highly recommend this car if you are in the market for an economical four door, sporty vehicle. Does recommend this car!! 13 out of 13 people found this review helpful.
How many Watts Does a Mitsubishi Lancer have?
The first thing we noticed about the Lancer was that 650 watts is an awful lot of audio power. Still in mild San Francisco traffic, the acoustic bass coming through the Lancer’s 10-inch in-trunk subwoofer from a Sirius jazz station set off numerous parked cars’ alarms as we idled by.
Why does my Dodge Lancer not turn on?
My Lancer would not start. Thought Id left l’d the fog lights on. Tried to use jumper leads but no. Then had a guy with an electrical meter test the battery. Nothing wrong with it. The got the Automobile Association breakdown guy to come. Just prior to this happening I had dropped my key and it came apart.
What kind of car is the Mitsubishi Lancer?
The Lancer is Mitsubishi’s smallest sedan and lowest-priced car in the U.S. lineup. The automaker is selling the 2008 Mitsubishi Lancer not as an economy car but as a “compact sport sedan,” and its appearance and equipment–especially for the top GTS model–take a decidedly sporty direction.
When did the Mitsubishi Lancer Concept X come out?
The 2008 Lancer brings the bold, dynamic lines of the show-stopping Mitsubishi Concept-X to the showroom. First shown in 2005, the stunning Concept X previewed not only the next generation Mitsubishi compact sport sedan, but also a new design language to convey an unmistakable brand identity.
Why does my Mitsubishi Lancer make a whining noise?
If it changes with the engine, it’s most likely going to be an accessory bolted to the engine (or the radio, shut it off and see if it stops). If it stay constant as you rev the engine it’s going to be something else. A whining sound when accelerating is almost always caused by a bad accessory attached to your Lancer’s engine.
What kind of engine does a Mitsubishi Lancer have?
The all-aluminum, two-liter, inline four-cylinder engine uses dual overhead cams and a variable valve-timing system called MIVEC to produce its combination of power and efficiency. At 60 pounds lighter than the last Lancer motor, the 2008 version revs freely and makes good use of the five-speed manual with which our tester was equipped.
The 2008 Lancer brings the bold, dynamic lines of the show-stopping Mitsubishi Concept-X to the showroom. First shown in 2005, the stunning Concept X previewed not only the next generation Mitsubishi compact sport sedan, but also a new design language to convey an unmistakable brand identity.
If it changes with the engine, it’s most likely going to be an accessory bolted to the engine (or the radio, shut it off and see if it stops). If it stay constant as you rev the engine it’s going to be something else. A whining sound when accelerating is almost always caused by a bad accessory attached to your Lancer’s engine.
What’s the top speed of a 2008 Mitsubishi Lancer?
(For California, Lancer is PZEV-certified and offers 143 horsepower at 6,000 rpm and 143 lb.-ft. of peak torque at 4,250 rpm.) The 2008 Mitsubishi Lancer is available in three levels of trim and driving dynamics: DE, ES and the sport-tuned GTS.
What kind of tires does a Mitsubishi Lancer GTs have?
The 2008 Lancer GTS – with the standard 5-speed manual transmission or the optional CVT – combines a sport-tuned suspension – including different stabilizer bars and spring/shock damping rates – with 18-inch wheels and 215/45 R18 tires to make this model an aggressive twisty-road tamer.
What’s the name of the new Mitsubishi Lancer?
The all-new, next-generation Mitsubishi Lancer for 2008 carries its driven-to-thrill engineering inside, with powerful audio and advanced user-technology options designed to exceed customers’ expectations. The sport-tuned Lancer GTS is also the technology leader of the line.
How to install valve tappet on Mitsubishi Lancer?
Install the valve tappet selected through the procedure 9, and put the camshaft in position. 11. After installing the timing chain, measure the valve clearance using the procedure 3 to 6. Confirm the clearance is within the standard value.
How to check valve clearance on Mitsubishi Lancer?
6. Check the valve clearance with the arrow shown in Figure. In the same procedure as 4. If the valve clearance is deviated from the standard value, remove the camshaft and the valve tappet. 8. Using a micrometer, measure the thickness of the removed valve tappet. 9.
How do you add Freon to a Mitsubishi Lancer?
How to add freon to your 2008 Mitsubishi Lancer: hook up the can of refrigerant (likely r-134a) to the low pressure port. When your compressor kicks on, add freon to the correct pressure. In addition to cooling, freon lubricates the compressor when it runs.
Install the valve tappet selected through the procedure 9, and put the camshaft in position. 11. After installing the timing chain, measure the valve clearance using the procedure 3 to 6. Confirm the clearance is within the standard value.
6. Check the valve clearance with the arrow shown in Figure. In the same procedure as 4. If the valve clearance is deviated from the standard value, remove the camshaft and the valve tappet. 8. Using a micrometer, measure the thickness of the removed valve tappet. 9.