How do you turn off the service engine light on a Mitsubishi Outlander?
To reset that indicator: Turn the Ignition ON (position 2) but do not start the engine. Press the button on the end of the wiper stalk repeatedly until the spanner symbol and miles to service appears on the display. Press and hold the button. The display will now change to the new service interval and start flashing.
When does the Mitsubishi Outlander check engine warning light come on?
The Mitsubishi Outlander check engine warning light comes on when a fault has been detected with the emissions, engine control system or A/T control system / CVT control system. Vehicle is usually good to drive for a short period of time, but have the fault diagnosed as soon as possible.
What should I do if my Mitsubishi Outlander battery cut out?
The Mitsubishi Outlander battery charging system service required indicates a fault in the charging system. The engine may cut out soon. Immediately turn off any vehicle systems that are not required and that use electric. This may keep the engine running longer. If within a short distance, make your way to a repair workshop.
Why does my Outlander have a low tyre pressure warning?
A tyre is significantly under inflated. Depending on your version of Outlander, the LOW TYRE PRESSURE warning message may appear. In this instance, stop as soon as possible – avoid sudden steering or harsh braking and replace the tyre. 2. The tyre pressure monitoring system (TPMS) is faulty.
What does the red warning light on the Mitsubishi Outlander mean?
If the warning light remains on, discontinue driving and contact a qualified Mitsubishi workshop. The Mitsubishi Outlander red engine overheating warning light indicates that the engine coolant is overheating. Depending on your version of Outlander, the message ENGINE OVERHEATING STOP SAFELY will display. In this instance: 1.
The Mitsubishi Outlander battery charging system service required indicates a fault in the charging system. The engine may cut out soon. Immediately turn off any vehicle systems that are not required and that use electric. This may keep the engine running longer. If within a short distance, make your way to a repair workshop.
When does the Mitsubishi Outlander check DPF light go out?
The Mitsubishi Outlander Check DPF System means there’s an excessive amount of particulate matter accumulated inside the diesel particulate filter (DPF). To assist with cleaning of the DPF, drive for around 20 minutes and at a speed of at least 40 km/h (25 mph). The light will go out when the cleaning process has done.
A tyre is significantly under inflated. Depending on your version of Outlander, the LOW TYRE PRESSURE warning message may appear. In this instance, stop as soon as possible – avoid sudden steering or harsh braking and replace the tyre. 2. The tyre pressure monitoring system (TPMS) is faulty.