When do you need a Mitsubishi Eclipse scan?
A scan tool is required for diagnosis, troubleshooting, calibrations, and checking for diagnostic trouble codes (DTCs) after a collision. The 2019 Mitsubishi Eclipse Cross service information has a document titled Post-Collision Diagnosis.
What kind of diagnostic scanner does Mitsubishi use?
All the Mitsubishi dealers in the US use the Multi-Use Tester (MUT) III. It is the diagnostic tool to access all the systems in Mitsubishi cars, trucks, and SUVs. The MUT3 is manufactured by Bosch, who is the OEM vendor. MUT 3 allows a technician to perform key reprogramming, in-depth diagnostic, and system configuration.
What is post collision diagnosis on Mitsubishi Eclipse?
The 2019 Mitsubishi Eclipse Cross service information has a document titled Post-Collision Diagnosis. Per the 2019 Mitsubishi Eclipse Cross service manual: “Perform the inspection and service on post-collision vehicles according to the procedures below regardless of the deployment or activation statuses of airbags and seat belt pre-tensioner.”
Where is the diagnostic code CEL on a Mitsubishi evoscan?
Custom Request: CA will clear the DTS / Diagnostic Trouble Code CEL (check engine light) fault memory. 96 & later are OBD2 systems and require a scanner. Locate Data Link Connector (DLC), next to fuse box. Connect voltmeter positive lead to DLC terminal #1 and Negative lead to terminal #12 (ground).
All the Mitsubishi dealers in the US use the Multi-Use Tester (MUT) III. It is the diagnostic tool to access all the systems in Mitsubishi cars, trucks, and SUVs. The MUT3 is manufactured by Bosch, who is the OEM vendor. MUT 3 allows a technician to perform key reprogramming, in-depth diagnostic, and system configuration.
Custom Request: CA will clear the DTS / Diagnostic Trouble Code CEL (check engine light) fault memory. 96 & later are OBD2 systems and require a scanner. Locate Data Link Connector (DLC), next to fuse box. Connect voltmeter positive lead to DLC terminal #1 and Negative lead to terminal #12 (ground).
What is the EFI pin for Mitsubishi diagnostics?
<< Pin1 Very important for mitsubishi diagnostics, ensure this is connected to EFI ECU pin 56 (evo4-8). << Pin7 Very important for diagnostics, ensure this is connected to EFI ECU pin 85 (evo9) or pin 62 (evo4-8).
How to do self diagnosis on a Mitsubishi evo7?
1 EFI/ABS/AYC/ACD (not used for Evo7+ EFI Diagnostics) join this pin to Ground (pin4 or 5) with a paper clip to get self diagnosis flashing lights on the dash to read the trouble codes by way of Long (+10s) and short (+1s) flashing lights. << Pin1 Very important for mitsubishi diagnostics, ensure this is connected to EFI ECU pin 56 (evo4-8).