How to work on your roof without falling off?
Work on your roof without falling off. By Robin Mansur. 6/30/08 2:35 PM. WonderHowTo. In this roofing video Bob Schmidt shows you how to use the foam padding from a sofa cushion to say secure and not fall while doing roof repairs.
What’s the best way to fix a slipped slate roof?
Slipped slates can be refixed using copper or aluminium alloy nails. Or, if just one or two are loose, then they can be secured using small folded metal clips known as ‘tingles’.
Is it alright for a gutter downspout from an upper roof to?
The one thing that pretty much everybody agrees on is that at least there should be a downspout to deliver the water to the lower roof and point it in the right direction. A hole at the bottom of the gutter or an open gutter end will just splash water around in a heavy rain.
What should I do if my roof tiles are missing?
If 10 or more tiles per slope are damaged or missing, the roof is likely to be nearing the end of its useful life and will need stripping and re-covering. With slate roofs, look for similar numbers of loose slates that have been refixed with small metal ‘tingles’.
Work on your roof without falling off. By Robin Mansur. 6/30/08 2:35 PM. WonderHowTo. In this roofing video Bob Schmidt shows you how to use the foam padding from a sofa cushion to say secure and not fall while doing roof repairs.
Why are my roof tiles slipping out of position?
Generally these tiles just need to be moved back into position and secured. One of the more common places for this to happen is where the tiles are next to a higher area / wall of the home. Roofers generally consider this a simple maintenance issue. Roofs may incur tiles that shift or move when bad weather hits.
Why are my shingles slipping on my roof?
Shingles can slip down if they aren’t nailed correctly or if too few nails have been used. You should use at least four nails per shingle, and raise that minimum to six on roofs with steep grades. Also, nails shouldn’t be driven into (or above) the self-sealing strip. 4. Insufficient securing of valley flashing.
How do you fix a sagging roof with plywood?
Place the plywood and styrofoam (side up) against the damaged roof decking. Push up on the plywood until the foam is touching the roof decking’s underside. Keep the plywood in place using a piece of lumbar strapping until you can get a roofing expert to repair it. Fixing a Gusset Plate