Is it OK to flash the high beams?
High Beams are OK< I can lock them and/or flash them no problems. Checked fuses all OK, no power on the fuses for low beams. Any ideas? There really is nothing to consider here besides the column ecu/switch and the front ecu (relay box) if you are not seeing power at the fuse.
What happens when both low beams die at the same time?
Both headlights low beams are… Both headlights low beams are dead, died at a same time. High Beams are OK< I can lock them and/or flash them no problems. Checked fuses all OK, no power on the fuses for low beams.
Why are the high beams locked on my Outlander?
Of course a factory scan tool is cost prohibitive. However since we are seeing the high beams lock, this is a GOOD sign for the switch and the column ecu. If the column ecu were not seeing the headlight switch turn on, then it would not allow locking of the high beam unless there were a very specific failure (unlikely).
Why do high beam headlights work but low beams don’t?
Most headlight systems are also designed with a relay that switches the power between low beam and high beam headlights. If this relay goes bad, it could allow power to the high beams, but not the low beams. 1. Headlight Bulbs This is the most common reason we see for why a car’s high beam headlights work but the low beams don’t.
What to do if your low beams don’t work?
Either way, if your low beams aren’t working but your high beams are, the first things we check are the bulbs. If you’re thinking of replacing the headlight bulbs yourself, make sure you’re familiar with the correct installation procedure for the type of bulb you’re replacing.
Is it safe to drive with high beams on?
No one wants to be driving along at night and have their headlights go out. In many cases, the high beams will still work when the regular headlights stop, but it’s just not safe to drive around with your high beams potentially blinding other drivers.
High Beams are OK< I can lock them and/or flash them no problems. Checked fuses all OK, no power on the fuses for low beams. Any ideas? There really is nothing to consider here besides the column ecu/switch and the front ecu (relay box) if you are not seeing power at the fuse.