Can a line output converter be used with an amplifier?
This lets you use RCA cables to run that signal to your amplifier. A line output converter offers some advantages, like the ability to sum and control signals of a multi-channel factory system. So if you’re upgrading a complex system, using a line output converter might be your best option.
How to convert speaker signal to line level?
Speaker level signals are usually in 3..20V range (amplifiers up to 50W output power). The line level signals should be in 0.3..2V range to be suitable for amplifier’s line level input. So attenuation of about 20 dB is needed to bring the signals to right level. This conversion can be done easily using 10:1 voltage divider circuit.
How do you hook up an amplifier to a radio?
There are two ways to do this: get a line output converter (LOC) that’ll adjust the speaker-level signal for your amp’s input, or get an amplifier with speaker-level inputs. You cut the factory speaker wires behind the radio, and connect the wires coming from the radio to your LOC or amp’s inputs.
What should the line level be in an amplifier?
The line level signals should be in 0.3..2V range to be suitable for amplifier’s line level input. So attenuation of about 20 dB is needed to bring the signals to right level.
How do you connect a line output converter to an amplifier?
Lastly, you will plug in the RCA cables to the line output converter and run and connect the RCA cables to the amplifier. If using the remote wiring you will also need to run that to the amplifier at this time. On a LOC that uses speaker connector terminals like the Scosche SLC-4, the process will be similar, but with just fewer steps.
There are two ways to do this: get a line output converter (LOC) that’ll adjust the speaker-level signal for your amp’s input, or get an amplifier with speaker-level inputs. You cut the factory speaker wires behind the radio, and connect the wires coming from the radio to your LOC or amp’s inputs.
How to install a line output converter in a car?
Clean up all wiring, secure the line output converter, and reinstall the stereo. Installing a line output converter in your vehicle is relatively easy for those that are comfortable with the above steps.
What should I do after installing an amplifier?
Now that all the wiring is completed, you will want to test your new amplifier. Connect your battery and turn on the stereo to ensure the amplifier, stereo, and speakers are working as expected. Make any necessary adjustments, if needed, and proceed to finalize your install.