What kind of engine does a 4G15 have?
From 1998 to 2002 a modification with direct fuel injection was produced, which was called 4G15 GDI. This allowed obtaining 100 HP at 6,000 rpm and the torque of 140 Nm at 3,000 rpm. Between 2001 and 2009, version 4G15 with a 16 valve SOHC head was produced, its power was 90 HP at 5,250 rpm, the torque of 133 Nm at 3,750 rpm.
What’s the firing order on a Mitsubishi 4G15?
For a cold engine, the clearances for intake valves are 0.07 mm, for exhaust valves — 0.17 mm. A timing belt with a service life of about 60,000 miles (100,000 km) is used here. When it breaks off, the valves will bend. The firing order is 1-3-4-2. Besides, the multi-point fuel injection system was used in these engines.
Where can I find the engine number on my car?
Finding the Engine Number Check the engine. Your vehicle’s engine number should be stamped right onto the engine of your vehicle. Look at your owner’s manual. If you cannot find a sticker on your engine that lists your engine number, then check your owner’s manual for this information. Identify the engine number.
Where can I find Briggs and Stratton engine model number?
If you’re looking for engine model numbers, type or code for any concerns, your best source of information would be a Briggs & Stratton Dealer. They have all the information relating to Briggs & Stratton engine warranty information, replacement parts, short blocks, pricing, service/repair, specifications, etc.
Where is the oil number on a Mitsubishi 4G18?
High oil consumption is a classic problem of all 4G18’s. The number is located on the exhaust side under the manifold. This engine is almost the same as the 4G15, so you can take advantage of the advice for boosting power from THIS ARTICLE.
From 1998 to 2002 a modification with direct fuel injection was produced, which was called 4G15 GDI. This allowed obtaining 100 HP at 6,000 rpm and the torque of 140 Nm at 3,000 rpm. Between 2001 and 2009, version 4G15 with a 16 valve SOHC head was produced, its power was 90 HP at 5,250 rpm, the torque of 133 Nm at 3,750 rpm.
What is the lubrication system of a 4G15 engine?
Lubrication system 4G15 Lubrication System • Used full flow pressure feed system • Oil Capacity up to 3.8 L • Engine oil is feed up by oil pump drive by crank shaft and oil pump gear • Oil pump used trochoid gear type and relief valve incorporated in the front case. Copy Right © Akademi Saga/EON Berhad 48.
How many valves does a Mitsubishi 4G15 DOHC have?
Their parts become a very fast moving item in local market (Malaysia) as the road is flooded with 4G15 engine, since the local foreman is too familiar with the 4G15 engine, it is quite a suprise for them when they first meet the 4G15 DOHC 16 valves engine in their workshop.