How to remove the switch panel from a Mini Cooper?
Unbolt the switch panel from the dashboard using a T-20 Torx-head screw and the 1/4-inch ratchet. Pull the panel away from the dash, and unplug the wiring on the backside. Remove the switch panel from the vehicle.
How to get a part for a Mini Cooper?
Call us 800-946-2642 or drop us a line to our Help Desk. Important Note: Select Your Car to ensure you get the right part for your MINI. Push Button For Reading Lamp Ea. – Mini Cooper & S Have a Question or Comment of your own?
How long does it take to remove knee panel from Mini Cooper?
To do that, the first thing you have to do is remove the defective panel. This should take about 30 minutes to do. Grip the interior knee panel located just below the steering column with your hand and pull the panel towards the ground.
How can I get into manual mode on my Mini Cooper?
Manual mode is also obtained by manually shifting the stick up or down, or using the paddle shifters. When in manual mode the transmission will not automatically up shift unless to prevent damage to the engine.
How do you remove the shift knob on a Mini Cooper?
To make removing the knob a bit easier, we need to shift the lever into drive (D). To do so, depress the brake pedal and push down on the yellow button to release the shift lock. Then, shift the transmission into drive. The stock knob is simply friction fit onto the shifter. To remove it, firmly grasp the knob with both hands and pull straight up.
How do you change the cable on a Mini Cooper?
Now pry the plastic cover off the bottom exposing the cables inside. Pop the cable ends off the ball joints. For the cable on the side, you can use a 14mm open end wrench in between the cable end and the ball joint to pry it off to the side (See Figure 18 ).
How do you remove the stock shift knob?
To do so, depress the brake pedal and push down on the yellow button to release the shift lock. Then, shift the transmission into drive. The stock knob is simply friction fit onto the shifter. To remove it, firmly grasp the knob with both hands and pull straight up. Do not twist the knob.
What happens to the gearshift cable on a Mini Cooper?
On the MINI, the spherical end joints at the transmission end are held by a rubber mount that can wear out and eventually tear away from the cable. In our case, the rubber surrounding the spherical end on the cable had worn away almost to this point. If it had separated, it could render the gearshift useless.