Where is the fuel cap button?
The fuel filler cap is located on the center of the fuel tank. The fuel cap automatically locks when you start the engine.
How do you change the fuel cap on a Mini Cooper?
Inner fender removed to show the fastener locations. You don’t have to pull the filler neck out of the fuel tank, but in order to get the filler cap out and the new one in, it is helpful to pull it up and away from the body so you have room to work. To release the fuel filler neck, loosen the two nuts on studs that are holding it in place.
What to do if your Mini Cooper fuel pump is not working?
In conclusion here is what I would do if it happened again to diagnosis a mini-cooper fuel pump issue. Remove the rear-seat, unbolt the protective fuel pump cover (driver side), unhook the connector and apply 12v to the blue lead location and ground to the brown lead location.
Is the fuel filler flap on my Mini Cooper not locking?
Thinking on the positive side, if your prepared to work through the issues, your going to end up with a decent little car. The hard part is the cost so by sourcing wreckers yards and being prudent, you can save and even more so if you can have someone mentor you in doing DIY repairs.
Can you fill a carbon fiber cap on a Mini Cooper?
A custom carbon fiber look filler cap for the Mini. While some people on forums have claimed to be able to do this without removing the inner part of the fender, it is much easier to do if you take the time and do it right. Removing the plastic inner fender requires only the removal of a few clips and screws, which doesn’t take much time at all.
Inner fender removed to show the fastener locations. You don’t have to pull the filler neck out of the fuel tank, but in order to get the filler cap out and the new one in, it is helpful to pull it up and away from the body so you have room to work. To release the fuel filler neck, loosen the two nuts on studs that are holding it in place.
Where is the fuel filler neck on a Mini Cooper?
Mini Cooper fuel filler neck. The filler door, hinge and the underlying housing the mounts to the body are all one assembly on the Mini. There are two clips hidden behind it which click into the edge of the fender opening.
How do you change gas door on Mini Cooper?
Open the door, press in with a small screwdriver and release the tab. The chrome part should just pull off now. If you are changing one type for the other, there is no need to do this step. Figure 1. Remove the stock gas lid.
A custom carbon fiber look filler cap for the Mini. While some people on forums have claimed to be able to do this without removing the inner part of the fender, it is much easier to do if you take the time and do it right. Removing the plastic inner fender requires only the removal of a few clips and screws, which doesn’t take much time at all.