How often should you replace your sway bar links?
The connecting point is called the control arm or struts. Also, the thing that connects the outer ends is the link. That is what we are going to focus on here. Now, when it comes to the overall lifespan of the sway bar link, it will be from four to five years.
Why do sway bar links need to be replaced?
These links are critical because they make sure that the sway bar does its job, which is to control side to side motion while the vehicle is turning. If the end links go bad, then there will be noise and play in the suspension, which could cause problems. To fix the issue, you must replace the links.
How to replace a rear sway bar link on a Taurus?
How to Replace a Rear Sway Bar Link on a Taurus or Sable. 1 Step 1. Lift the rear of the car with the jack and put the car on jack stands. Take off the rear wheels with the tire iron and move them to the side. 2 Step 2. 3 Step 3.
How do you remove a sway bar from a car?
Unbolt the sway bar end link from the sway bar using the 3/8-inch ratchet and socket and an open-end wrench. Unbolt the end link from the strut with the same tools. Repeat on the other side of the vehicle, then pull the links off of the suspension and sway bar.
How do you unbolt a sway bar link?
Unbolt the sway bar end link from the sway bar using the 3/8-inch ratchet and socket and an open-end wrench. Unbolt the end link from the strut with the same tools.
When to replace a worn out sway bar link?
A worn-out sway bar link will show a freeplay when pushed up or down. An extremely worn out sway bar link can separate. This will cause your car to lean excessively in turns and feel less stable and secure on the road. A worn-out sway bar link must be replaced to keep your vehicle safe.
Where are the sway bars on a car?
Most of the cars have one sway bar in the front and another separate sway bar in the rear suspension. Some cars have only one sway bar in the front suspension. Sports cars have thicker sway bars for better stability when cornering. Sway (stabilizer) bar link. A sway bar is connected via rubber bushings to the car body or frame in the middle.
What are the ball joints on a sway bar?
The part that connects the outer ends of the sway bar to the suspension component is called a sway bar link. In most cars a sway bar link has two small ball joints at each end. Over time, the sway bar link ball joints wear out. The first sign of a worn-out sway bar link is a knocking noise from the suspension when driving slow over road bumps.
Why are my sway bar links making a creaking noise?
In rare cases, if the grease inside the sway bar link joints dries up, it may also make a creaking noise when the suspension is moving up and down. Your mechanic can check the sway bar links while performing a regular service with the car on the lift. A worn-out sway bar link will show a freeplay when pushed up…