What makes a MerCruiser engine not start up?
1. A bad key switch. 2. A blown ignition fuse. 3. A bad harness connection or bad harness. 4. A bad shift cable. 5. A faulty Shift Interuptor Switch on the shift plate assembly. 6. A shorted tachometer. 7. A removed or faulty Safety Lanyard Switch. 8. A bad ignition coil.
What causes a car engine to not start?
All engines require three things to start and run: spark, fuel and compression. If any one of these is missing, your engine will not start. But with all that working your engine will not start. Engine Will Not Start-The most likely cause is that the fuel injectors are probably not opening.
Can a low pressure fuel system cause spark plugs to wear out?
A low-pressure fuel system will destroy the spark plugs that ignite the fuel in an engine’s cylinder. If by chance you are replacing them and you find they are worn out before their time, you might be looking at a problem with your fuel system.
Why does my MerCruiser Tester have no spark?
Make sure the other end of the tester is attached to a good clean ground. Crank the engine and check for spark. If you have no spark, there are several things which can be at fault. Below is a quick list of items which can cause a “no spark” condition from the coil: 1. A bad key switch. 2. A blown ignition fuse. 3.
What should I do if my MerCruiser engine won’t start?
Mercruisers have a powerfulignition system that will shock the hell out of you! Your local Auto Parts Supply Store will usually sell a Spark Tester. Get the best spark tester they have. This is a great tool to keep in your boats tool box.
All engines require three things to start and run: spark, fuel and compression. If any one of these is missing, your engine will not start. But with all that working your engine will not start. Engine Will Not Start-The most likely cause is that the fuel injectors are probably not opening.
Make sure the other end of the tester is attached to a good clean ground. Crank the engine and check for spark. If you have no spark, there are several things which can be at fault. Below is a quick list of items which can cause a “no spark” condition from the coil: 1. A bad key switch. 2. A blown ignition fuse. 3.
What should I do if my Mercedes Benz won’t start?
Start the car and you should be able to get around 60 psi. When the engine is running and when you turn off the engine the pressure should stay steady. Always perform this test on a cold engine. Next, make sure that the fuel injector connections are secure and not loose. Check the fuel pump and the fuel pump relay.