What are the p0120 and p2135 codes?
I have 2 codes P0120 and P2135, I first replace the pigtail and TPS sensor same problem and codes (Reduced engine power). so i bit the bullet and replaced the throttle body along with another new TPS (it came attached ) still same problem…any help?… codes P0340 and P0120 please help!
What causes a p0120 code on a throttle return?
Potential causes of the P0120 code include: Sticking throttle return spring MAP or TPS connector corrosion Misrouted harness causing chafing Bad TPS Bad PCM
How much does it cost to repair a p1705 sensor?
Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins. The cost of diagnosing the P1705 code is 1.0 hour of labor. The auto repair labor rates vary widely across the country, and even within the same city. Most auto repairs shops charge between $75 and $150 per hour.
What kind of DTC is p0120 TPS sensor?
Other TPS sensor and circuit related DTCs: P0121, P0122, P0123, P0124 i have a 2003 chevy Tahoe with a 5.3 vortec.
I have 2 codes P0120 and P2135, I first replace the pigtail and TPS sensor same problem and codes (Reduced engine power). so i bit the bullet and replaced the throttle body along with another new TPS (it came attached ) still same problem…any help?… codes P0340 and P0120 please help!
Potential causes of the P0120 code include: Sticking throttle return spring MAP or TPS connector corrosion Misrouted harness causing chafing Bad TPS Bad PCM
How does the TPS work on a Nissan p0120?
The TPS sends the throttle position information back to the PCM on this signal wire. When the throttle is closed the signal is near .45 volts. At WOT (Wide Open Throttle) the TPS signal voltage will approach a full 5 volts.
What is the p0120 TPS signal voltage at WOT?
When the throttle is closed the signal is near .45 volts. At WOT (Wide Open Throttle) the TPS signal voltage will approach a full 5 volts. When the PCM sees a voltage that is outside of normal operating range, P0120 will set. NOTE: The PCM knows that any large change in throttle position means a cooresponding change in manifold pressure (MAP).
What are the possible causes of Nissan p1705 engine failure?
P1705 NISSAN Possible Causes 1 Faulty Electric Throttle Control (ETC) 2 Electric Throttle Control (ETC) harness is open or shorted 3 Electric Throttle Control (ETC) circuit poor electrical connection
The TPS sends the throttle position information back to the PCM on this signal wire. When the throttle is closed the signal is near .45 volts. At WOT (Wide Open Throttle) the TPS signal voltage will approach a full 5 volts.