What happens when the size of the dashboard is too big?
Range: The dashboard scales between minimum and maximum sizes that you specify. If the window used to display the dashboard is smaller than the minimum size, scroll bars are displayed. If it’s larger than the maximum size, white space is displayed.
What are some common wiring mistakes for LEDs?
Common Wiring Mistakes When troubleshooting the wiring of your LED installation it is important to double and even triple check every connection, even the most skilled electricians can make a simple wiring mistake. A very common wiring mistake that is easily overlooked is the possibility of loose or obstructed wires in your LED installation.
What do the show and hide buttons do on the dashboard?
Show/Hide buttons let dashboard viewers toggle the visibility of floating layout containers, revealing them only when necessary. Show/Hide buttons can be particularly helpful when you want to temporarily hide groups of filters to reveal more of a visualization. Select a floating layout container.
When is a wire connection error a fire hazard?
A classic wire connection error is when wires are joined together with electrical tape rather than a wire nut or other sanctioned connector. This is a potential fire hazard and should be corrected whenever you see it. To fix the problem, first, turn off the power to the circuit.
What should I do if I accidentally cut into a wire?
This is best accomplished by a qualified electrician who can identify the wire, examine the damage and make a decision about what needs to be done. The cable will need to be cut. Place the cable into an approved accessible junction box.
Where does the warning light wire go in a car?
If your car has an alternator, the warning light wire connection depends on whether the alternator is fitted with an internal or an external voltage regulator. If the alternator is fitted with an internal regulator, the wire you want connects directly to a terminal on the back of the unit marked WL or IND.
What happens if you cut a transducer cable?
Not cut through, but nicked through the insulation and into the wire. Obviously to get to that point the foil shield has been cut through as well. I appreciate all the feedback on how to fix, but I may actually be off the hook with this one.
Where does the ignition warning light come from?
The wire runs from the alternator through the bulkhead and up to the warning light mounted in the dashboard. From here it runs to the ignition/starter switch. In general, if the charging system is working normally, the warning light should glow when the ignition is switched on and then extinguish when the engine is started.