How to reset Ford Lincoln Mercury immobilizer system?
Ford Lincoln Mercury Reset of the Immobilizer System Call to the dealer, this is their response: Hold the panic button on the key fob for 2 seconds. Close all of the doors and while using the key lock and use the key to unlock the lock the driver’s door. If that doesn’t work remove the negative battery cable for 15 seconds and reconnect.
Can you change the ECU on a immobilizer?
Had a customer come in with problems and found the ecu to be bad. This car is equipped from factory with an immobilizer system. Many cars around this year will have the same. Simply switching ecu’s will no longer work. The code in the key and the ecu have to match in order to start the car.
Is there an anti theft system on a Mercury?
Contrary to popular belief, Ford, Lincoln and Mercury vehicles do not come equipped from the factory with a standard alarm system. Instead, the Ford Motor Company equips its vehicles with a passive anti-theft system, known as P.A.T.S.
What’s the best way to reset a car immobilizer?
Hold down the panic button for five seconds to reset the immobilizer. Next, push the lock button two times and wait ten feet away from the car for ten minutes. Then hit the unlock button on the fob twice this should deactivate the security system which should be accompanied by exterior lights flashing or an audible horn beep.
Ford Lincoln Mercury Reset of the Immobilizer System Call to the dealer, this is their response: Hold the panic button on the key fob for 2 seconds. Close all of the doors and while using the key lock and use the key to unlock the lock the driver’s door. If that doesn’t work remove the negative battery cable for 15 seconds and reconnect.
Contrary to popular belief, Ford, Lincoln and Mercury vehicles do not come equipped from the factory with a standard alarm system. Instead, the Ford Motor Company equips its vehicles with a passive anti-theft system, known as P.A.T.S.
Hold down the panic button for five seconds to reset the immobilizer. Next, push the lock button two times and wait ten feet away from the car for ten minutes. Then hit the unlock button on the fob twice this should deactivate the security system which should be accompanied by exterior lights flashing or an audible horn beep.
How to reset an anti theft system for a Mercury Mountaineer?
At that time, the little red light should return to blinking at the slower, passive rate. If, once again, the Mountaineer fails to start, continue to Step 3. Raise the hood and use the battery terminal wrench, or a standard box wrench, to remove the negative battery cable. Wait 15 minutes before reconnecting the cable, then repeat Step 1.