What should I do if my idle cam is not working?
An alignment mark is stamped on the fast idle cam so that the top of the cam will face in the correct direction. If necessary, adjust the fast idle cam screw (A) until the alignment mark is centered on the lever roller. Start the engine and let it warm to operating temperature, or do the repair after a few errands that you needed to run anyway.
How to troubleshoot an automotive engine high idle?
The troubleshooting procedure for high and low idle conditions are similar, which are included in the following: Step 1 – If the check engine or service engine light soon has illuminated retrieving the diagnostic trouble codes could lead you in the right direction of what the problem is, or is related too.
How can I check the idle air control?
To perform a rough check of the idle air control, remove the valve while reconnecting the wiring harness. While observing the valve with a flashlight, turn the key to the “ON” position, (DO NOT START ENGINE.) the valve should move slightly.
When to remove an idle air control valve?
Because of the nature of this valve (large air volume processed) it should be serviced when a tune up is performed to remove “coking” which will hinder the valve’s performance. To perform a rough check of the idle air control, remove the valve while reconnecting the wiring harness.
The troubleshooting procedure for high and low idle conditions are similar, which are included in the following: Step 1 – If the check engine or service engine light soon has illuminated retrieving the diagnostic trouble codes could lead you in the right direction of what the problem is, or is related too.
To perform a rough check of the idle air control, remove the valve while reconnecting the wiring harness. While observing the valve with a flashlight, turn the key to the “ON” position, (DO NOT START ENGINE.) the valve should move slightly.
Because of the nature of this valve (large air volume processed) it should be serviced when a tune up is performed to remove “coking” which will hinder the valve’s performance. To perform a rough check of the idle air control, remove the valve while reconnecting the wiring harness.
How can I keep my car at idle?
Step 3 – Engine vacuum is a sealed system and must hold a specific amount to maintain proper idle conditions, inspect the engine vacuum hoses and intake gaskets. Step 4 – The air intake boot or tube is used to deliver air to the intake system of the engine.
Where is the alignment mark on the fast idle cam?
Remove the air cleaner assembly. Make sure the fast idle cam alignment mark is centered on the lever roller as shown in the figure. An alignment mark is stamped on the fast idle cam so that the top of the cam will face in the correct direction.
What’s the idle speed on a 1997 Nissan Hardbody?
I have a 1997 Nissan Hardbody with a 2.4-liter engine, manual transmission, A/C, and 89,000 miles. It idles at 1,500 rpm, which doesn’t go down after it’s warm. I checked all the plugs and everything seems to be plugged correctly.
What’s the idle RPM on a Nissan truck?
It idles at 1,500 rpm, which doesn’t go down after it’s warm. I checked all the plugs and everything seems to be plugged correctly. Any help would be appreciated. The first thing to do is to check for vacuum leaks. Then make sure the throttle linkage is free and moving smoothly. Also check the fast idle cam.
Why is my Nissan Pathfinder running rough at idle?
These packs are fired by the engines computer at exactly the right time to provide the optimal ignition timing. If a coil pack goes bad, it’ll cause a misfire and rough idle condition. Really, your Pathfinder will be running rougher at any RPM, but a misfire will be most pronounced at idle.
Why does my Nissan Pathfinder not speed up?
If your Pathfinder won’t accelerate, but the RPM’s go up it’s usually not going to be an engine related issue. Somehow, the power that your engine is creating is not making it to the rear wheels. This is typically a transmission related issue.
When does the idle air control valve change?
When the engine is running but the vehicle is not moving, this means the engine is idling. During this time, the number of revolutions per minute (RPM) inside the engine will change. The idle air control valve is responsible for managing the engine idle speed.
How can I tell if my idle control motor is working?
Look for a difference in idle speed. Allow the engine to run for a minute so it settles to a consistent idle, then take note of any difference in the idle RPMs versus the idle you observed earlier. If the idle has not changed at all, it’s likely because your idle control motor has not been functioning.