What does a 2001 Mercury Sable use for oil?
Castrol Edge Synthetic Motor Oil 5W-20 1 Quart.
What kind of oil do I put in my 2000 Mercury Grand Marquis?
Engine Oil
| Viscosity: | 5W-20 (All TEMPS) This specification has been updated from 5W-30 to 5W-20 per a Technical Service Bulletin from the manufacturer 5W-20 is the preferred viscosity. |
|---|---|
| Capacity: | 5 quarts (with filter)After refill check oil level. |
| Torque: | 10 ft/lbs (Oil Drain Plug) |
What kind of oil do you put in a MerCruiser?
Recommended Mercury Quicksilver Marine Engine Oil OIL LOW HP: 2.4 HP – 30 HP MID HP: 40 HP – 115 HP HIGH HP: 115 HP AND ABOVE CATALYZED/NON-CATALYZED ENGINES 10W30 Good Good Good Not Recommended 25W40 Good Good Good Good 25W40 Synthetic Blend Best Best Best Best
What kind of oil does Mercury Premium TCW 3 use?
Mercury Premium TCW 3 is specifically formulated with a higher concentration marine additive package to meet the needs of high-horsepower outboards including direct fuel-injected engines in extreme marine operating conditions. Far exceeds Mercury in-house test standards, which are more stringent than the industry’s TC-W3 standard.
What kind of lubricants do mercury diesel engines use?
Mercury Precision Lubricants Diesel Engine Oil Diesel (15W-40) engine oil Specifically formulated and developed to meet the needs of all marine diesel engines, including Mercury MerCruiser D-Tronic. Mercury 15W 40 Diesel Engine Oil contains a higher additive level than standard fleet oils, providing greater protection.
Which is better mercury oil or synthetic oil?
25W-40 Synthetic Blend Oil shows significantly better shear stability and volatility and is higher in viscosity and High-Temperature High Shear (HTHS) after shear. The popular competitive formulation uses a fair amount of VM (viscosity modifier) which is subject to shear, while the Mercury oil contains no VM.
What kind of oil does Mercury Marine use?
Mercury Marine’s FC-W 10W30, 25W40 and 25W50 Mineral and Synthetic Oil outperforms automotive oils in marine applications due to its specialized additive packages designed for marine engines.
What kind of oil does a Mercury autoblend use?
– Mercury or Quicksilver Premium Plus 2-Cycle TC-W3 Outboard Oil. Autoblend models have an oil reservoir mounted inside the boat that automatically blends oil with the fuel at a constant ratio of 50:1; 2-stroke oil is added to the reservoir and does not need to be mixed with the fuel (unless required for running-in)
Which is better Mercury 25w-40 or synthetic competitive oil?
As a result, the Mercury oil will hold its viscosity far better in difficult situations. The HTHS after shear follows along with the viscosity stability, which results in improved bearing protection. Use of the full synthetic competitive oil resulted in higher oil consumption than the Mercury 25W-40.
What kind of oil does a Mercury Verado use?
Verado Oil meets the stringent marine operational requirements of all Mercury’s 4- and 6-cylinder Verado models. First-in-class for all FC-W durability test properties, with industry-leading internal marine engine corrosion protection.