How do you change timing on a Mercury Capri?
Set engine timing to TDC on #1 cylinder. Crack the three bolts holding the water pump pulley on before loosening the belt. If you do happen to remove the belts before loosening the water pump pulley bolts, you can hold the pulley in place by wrapping the belt back around the pulley and holding it tightly, as close to the pulley as possible.
How to replace your MerCruiser water pump impeller?
You should remove the hoses from the thermostat housing to the supply pump outlet as well as the pump inlet hose and backflush all the way out of the sterndrive to ensure there are not any restrictions. Step #5: Make sure that there are no leaks on the inlet side of the water pump that would allow the pump to draw air and therefore cavitate.
Is the 1991-94 Mercury Capri a rare car?
Perrya shares his experience working on his own Mercury Capri. The 1991-94 Mercury Capri will be a rare car by 2020, 30 years after it was first made. Only 66,000 were made worldwide, and fewer than 40,000 still exist.
Why does my MerCruiser water pump stop working?
Common causes of restriction are grass, weeds, and the remains from previous water pump impellers that come apart resulting from overheating. If your engine is equipped with an oil, power steering, fuel or engine cooler these will most likely be the areas for debris to become trapped.
Set engine timing to TDC on #1 cylinder. Crack the three bolts holding the water pump pulley on before loosening the belt. If you do happen to remove the belts before loosening the water pump pulley bolts, you can hold the pulley in place by wrapping the belt back around the pulley and holding it tightly, as close to the pulley as possible.
Perrya shares his experience working on his own Mercury Capri. The 1991-94 Mercury Capri will be a rare car by 2020, 30 years after it was first made. Only 66,000 were made worldwide, and fewer than 40,000 still exist.
Are there any Mercury Capri’s left in the world?
The 1991-94 Mercury Capri will be a rare car by 2020, 30 years after it was first made. Only 66,000 were made worldwide, and fewer than 40,000 still exist. When they encounter engine trouble, many Capri owners simply junk a perfectly good car because they are afraid they won’t be able to find parts, or because they don’t have the service manual.
What kind of engine does a Capri have?
Actually, since the engine is a 1.6L Mazda DOHC which is still found in recent cars, parts are not hard to locate. With some effort you can often keep your Capri going. The Capri, like any car, does have its idiosyncrasies. Fuel pump. For instance, the automatic fuel pump will shut down if the car is lightly bumped by another car or a bad pothole.
Where is the I mark on a Mercury Capri?
Continue rotating until the “E” (exhaust)mark on the right camshaft pulley lines up with the “E” mark engraved on the cam dust cover and the “I” (intake) mark on the left camshaft pulley lines up with the “I” mark on the head. This must be exact.
How long do timing belts last on a Capri?
Belts are well made and made to last 10 years if in operation. At least the good news is that the Capri engine is “non-interference,” meaning that if the belt breaks suddenly while you are driving, the car will just suddenly die and you can glide off to the side of the road.
What to do if your Capri has engine trouble?
When they encounter engine trouble, many Capri owners simply junk a perfectly good car because they are afraid they won’t be able to find parts, or because they don’t have the service manual. Actually, since the engine is a 1.6L Mazda DOHC which is still found in recent cars, parts are not hard to locate.
Where is the outside air temperature sensor located?
The outside air temperature sensor is normally mounted behind the grille or at the base of the windshield. Majority of these sensors work just the same as the engine air temperature sensor. However, some use an infrared sensor to check the body temperature of the vehicle’s occupants.
Where is the charge temperature sensor located in a car?
Charge Temperature Sensor (CTS) Where is the Air Charge Temperature Sensor Located in a Car? The Intake Air Temperature Charge (IAT) sensor in a car is located on the bottom of the intake manifold which is directly behind the throttle valve housing. How Does The Air Temperature Sensor Works?
What happens if an air temperature sensor is faulty?
A defective air temperature sensor may affect the operation of the EGR valve if the PCM uses air temperature to control when the EGR valve opens. A faulty air temperature sensor reading warmer than normal will naturally lead to a lean fuel condition, thereby increasing the risk of detonation and lean misfire.
How much does it cost to replace timing belt?
It takes a mechanic a good 4 hours to replace a timing belt ($35) and a water pump ($75) and his labor is $100/hr, so the job would cost $500 at least. When deciding when to do it, is time or mileage more important? Suppose you have a car that is 20 years old like the Capri, yet the miles are only 60k.
Belts are well made and made to last 10 years if in operation. At least the good news is that the Capri engine is “non-interference,” meaning that if the belt breaks suddenly while you are driving, the car will just suddenly die and you can glide off to the side of the road.
It takes a mechanic a good 4 hours to replace a timing belt ($35) and a water pump ($75) and his labor is $100/hr, so the job would cost $500 at least. When deciding when to do it, is time or mileage more important? Suppose you have a car that is 20 years old like the Capri, yet the miles are only 60k.
Can a broken timing belt damage an engine?
Since the motor is non-interference, the broken belt should not damage the engine; the pistons will not clash with the valves and vice versa. So, no worries there. The bottom line is that if your timing belt has obvious wear and cracking in places, it is a good time to pay the cost.