When did the Mercury Villager minivan come out?
Launched in July 1992 as a 1993 model, the Mercury Villager was introduced at the 1992 Chicago Auto Show. After having forgone the minivan segment since the 1986 introduction of the Aerostar, the Villager marked the first time since 1960 that the division sold a vehicle with no Ford (or Lincoln) counterpart.
Who was the manufacturer of the Mercury Villager?
Under the terms of the agreement, the development and engineering of the vehicles was done by Nissan (in the United States); the company also supplied the engine and transmission. Ford would manufacture the vehicles in its own facility, providing components for the vehicle. Development officially commenced later that year, codenamed VX54.
How big is the wheelbase of a Mercury Villager?
Using a 112.2-inch wheelbase, the chassis shares nearly an identical wheelbase with a standard-wheelbase 1984-1995 Chrysler minivan (an inch longer than a short-wheelbase Chevrolet Astro). The Villager uses MacPherson struts for the front suspension and leaf springs for the solid rear axle.
What kind of grille does the Mercury Villager have?
In line with the Mercury Sable and Mercury Topaz sedans, the Villager was distinguished from its Nissan Quest counterpart by its front lightbar grille.
Launched in July 1992 as a 1993 model, the Mercury Villager was introduced at the 1992 Chicago Auto Show. After having forgone the minivan segment since the 1986 introduction of the Aerostar, the Villager marked the first time since 1960 that the division sold a vehicle with no Ford (or Lincoln) counterpart.
What kind of engine does a Mercury Villager have?
Sharing its engine with the Nissan Maxima, the Villager was powered by a 3.0L Nissan VG30E V6 (detuned from 160 to 151 horsepower). A Jatco -supplied 4-speed automatic was the sole transmission offering. In the development of the VX54 model line, Ford requested several design changes from Nissan before it would use the engine.
What was the length of the first Mercury Villager?
At 190 inches long, the first-generation Villager nearly matches the extended-length 1991-1995 Chrysler minivans in length. In contrast to the Aerostar, the Villager was produced solely as a passenger van and in a single body length. All versions were produced with single sliding door.
What kind of seats does a Mercury Villager have?
For 1993, the Villager was offered with GS and LS trim levels, in line with Mercury sedans. The second-row seat of the GS was a two-passenger bench seat; the LS was available with either a bench seat or two bucket seats.
Under the terms of the agreement, the development and engineering of the vehicles was done by Nissan (in the United States); the company also supplied the engine and transmission. Ford would manufacture the vehicles in its own facility, providing components for the vehicle. Development officially commenced later that year, codenamed VX54.
Is the Nissan Quest the same as the Mercury Villager?
It has been suggested that this article be merged with Nissan Quest. (Discuss) Proposed since April 2018. The Mercury Villager is a minivan manufactured by Nissan and marketed by Ford’s Mercury subdivision for the model years 1993–2002, across a single generation.
In line with the Mercury Sable and Mercury Topaz sedans, the Villager was distinguished from its Nissan Quest counterpart by its front lightbar grille.
What kind of suspension does a Mercury Villager have?
The VX54 chassis has a 112.2-inch wheelbase (sized nearly identically to the short-wheelbase Chrysler minivans). The Villager uses MacPherson struts for the front suspension and leaf springs for the solid rear axle. The front brakes were vented discs with rear drums; anti-lock brakes were fitted as standard equipment.
For 1993, the Villager was offered with GS and LS trim levels, in line with Mercury sedans. The second-row seat of the GS was a two-passenger bench seat; the LS was available with either a bench seat or two bucket seats.
The VX54 chassis has a 112.2-inch wheelbase (sized nearly identically to the short-wheelbase Chrysler minivans). The Villager uses MacPherson struts for the front suspension and leaf springs for the solid rear axle. The front brakes were vented discs with rear drums; anti-lock brakes were fitted as standard equipment.
Using a 112.2-inch wheelbase, the chassis shares nearly an identical wheelbase with a standard-wheelbase 1984-1995 Chrysler minivan (an inch longer than a short-wheelbase Chevrolet Astro). The Villager uses MacPherson struts for the front suspension and leaf springs for the solid rear axle.
What kind of brakes did the Mercury Villager have?
The Villager uses MacPherson struts for the front suspension and leaf springs for the solid rear axle. The front brakes were vented discs with rear drums; anti-lock brakes were fitted as standard equipment. The first-generation Villager (and its Quest counterpart) was powered by a single engine through its production.
When was the last year the Mercury Villager was made?
2002 was the last model year, concluding the Ford and Nissan joint venture. The last Mercury Villager rolled off the assembly line on June 27, 2002. The 1999-2002 Villager shared the same generation Nissan Quest’s distributor, which was notorious for its defects.
It has been suggested that this article be merged with Nissan Quest. (Discuss) Proposed since April 2018. The Mercury Villager is a minivan manufactured by Nissan and marketed by Ford’s Mercury subdivision for the model years 1993–2002, across a single generation.
Sharing its engine with the Nissan Maxima, the Villager was powered by a 3.0L Nissan VG30E V6 (detuned from 160 to 151 horsepower). A Jatco -supplied 4-speed automatic was the sole transmission offering. In the development of the VX54 model line, Ford requested several design changes from Nissan before it would use the engine.
When did the Mercury Villager change its name to Squire?
With the demise of the Edsel brand, the Villager name was shifted to the Mercury brand in 1962, becoming the counterpart of the Ford “Squire” designation for wood-grain station wagons.
How do you change the spark plug on a Mercury Villager?
Spray or rub the anti-seize compound onto the threads of the new spark plug and into the wire socket. Insert the new spark plug, and tighten by hand. Difficult access may involve using the socket wrench, but tighten carefully to avoid cross-threading or damaging the plug.
The Mercury Villager is a type of minivan produced by Ford between 1993 and 2002. One of its most popular features is the movable seats that give the owner the option of using it as a five-seater vehicle or as a van with large cargo space.
Spray or rub the anti-seize compound onto the threads of the new spark plug and into the wire socket. Insert the new spark plug, and tighten by hand. Difficult access may involve using the socket wrench, but tighten carefully to avoid cross-threading or damaging the plug.
How to replace a brake light in a Mercury Villager?
Grasp the exposed brake light bulb in your fingers and firmly pull it straight out. The spring clip holding it in will give way and release the bulb when you pull it out.
What was the problem with my 93 villager?
I just repaired the problem on my ’93 Villager, and it was caused when the wiring harness to the driver’s side door manual lock was pinched between the interior door panel and some metal part inside the door. The insulation wore through and was grounding the circuit against the metal part.
Where is the keyless entry module on a 93 villager?
On my ’93 Villager there is a green/red stripe wire which goes from the door lock actuator assembly to power door lock module (or the keyless entry module, if you have that). (the modules are in the center console area…) I cut this wire inside the driver’s door.
What was the second row seat on a Mercury Villager?
The second-row seat of the GS was a two-passenger bench seat; the LS was available with either a bench seat or two bucket seats.
With the demise of the Edsel brand, the Villager name was shifted to the Mercury brand in 1962, becoming the counterpart of the Ford “Squire” designation for wood-grain station wagons.
The Villager uses MacPherson struts for the front suspension and leaf springs for the solid rear axle. The front brakes were vented discs with rear drums; anti-lock brakes were fitted as standard equipment. The first-generation Villager (and its Quest counterpart) was powered by a single engine through its production.
At 190 inches long, the first-generation Villager nearly matches the extended-length 1991-1995 Chrysler minivans in length. In contrast to the Aerostar, the Villager was produced solely as a passenger van and in a single body length. All versions were produced with single sliding door.
Where was the Mercury Villager Nissan Quest made?
Mercury Villager. Internally designated as model VX54, the Villager was a rebadged variant of the Nissan Quest —a product of a joint venture between Ford and Nissan, manufactured at Ford’s Ohio Assembly plant in Avon Lake, Ohio .
What was the original name of the Mercury Villager?
Along with Ranger, Villager was the only nameplate produced through the entire existence of the brand. Following the demise of Edsel, the Villager name was revived by Mercury in 1962, denoting the Comet station wagon with simulated woodgrain trim.