What kind of power steering does a cougar have?
Bare metal power steering hose bracket for any 1967-69 small block Mercury Cougar or Ford Mustang. 289-2V, 289-4V, 302-2V, 302-4V, 351-2V, and 351-4V. No rubber insulator included. Wanted!
What is the bracket on a Ford Cougar?
D0AZ-3A732-C Stamped steel bracket for mounting the power steering pump. Ford called this bracket the ‘power steering pump adjusting bracket’. For any factory air conditioned or non-air conditioned 1971 – 1973 Cougar or Mustang with 351 engines, additionally used on Mustangs with the F code 302 V8 engines.
How big is the spacer on a 1973 Mercury Cougar?
For most 1970 – 1973 Mercury Cougar or Ford Mustang with 351C engines. Spacer dimensions: 7/16″ I.D. and 1/2″ thick.*Note 1970 and later cars with 302 or 351W engines use a 3/4 inch spacer. Wanted! 384542-S2 Power steering pump adjusting spacer for use without air conditioning.
How big is the spacer on a power steering pump?
Flat steel bar stock spacer that positions the power steering pump a measured distance away from the cylinder head. The bars are 3-3/8″ x 3/4″ x 1/2″ in size. The threaded hole in the center is tapped 3/8-16.
Bare metal power steering hose bracket for any 1967-69 small block Mercury Cougar or Ford Mustang. 289-2V, 289-4V, 302-2V, 302-4V, 351-2V, and 351-4V. No rubber insulator included. Wanted!
For most 1970 – 1973 Mercury Cougar or Ford Mustang with 351C engines. Spacer dimensions: 7/16″ I.D. and 1/2″ thick.*Note 1970 and later cars with 302 or 351W engines use a 3/4 inch spacer. Wanted! 384542-S2 Power steering pump adjusting spacer for use without air conditioning.
D0AZ-3A732-C Stamped steel bracket for mounting the power steering pump. Ford called this bracket the ‘power steering pump adjusting bracket’. For any factory air conditioned or non-air conditioned 1971 – 1973 Cougar or Mustang with 351 engines, additionally used on Mustangs with the F code 302 V8 engines.
Flat steel bar stock spacer that positions the power steering pump a measured distance away from the cylinder head. The bars are 3-3/8″ x 3/4″ x 1/2″ in size. The threaded hole in the center is tapped 3/8-16.
How to repair power steering on Mercury Cougar XR7?
Place the front half of the control valve with new gasket on the actuator rod and install the two 1/2″ bolts. Now, place and position the return spring and all washers/spacers in the exact order back on rod. Tighten the 1/2″ nut all the way until snug, then back it off no more than 1/4 turn.
How to download a 1967 Mercury Cougar wiring diagram?
2.6 MB Downloadable PDF file of the complete 1967 Mercury Cougar electrical wiring diagram used by Ford Technicians. You will receive a download link both on the order confirmation screen and via email once your order is complete.
What causes loose steering on a Mercury Cougar?
If it is not leaking, it is probably okay. Loose steering is not a symptom of control valve trouble; however, a leak or hard steering may be. Very often loose steering is due to an idler arm or ball joint being worn, which brings me to the control valve’s other half; the ball stud and slider.
How do you repair power steering on a Mercury Cougar?
Spray a quick dab of paint on the center link, then rotate the control valve off of the center link. Make sure to turn the control valve counter-clockwise to remove the valve. Turning it in the wrong direction will remove the paint, which means taking the car to the alignment shop.
2.6 MB Downloadable PDF file of the complete 1967 Mercury Cougar electrical wiring diagram used by Ford Technicians. You will receive a download link both on the order confirmation screen and via email once your order is complete.
Is the Mercury Cougar carpet dropship still in stock?
Availability Not Set Back Order Carpet Dropship Discontinued Download Gift Certificate Normal Stock Item Out of Stock Out of Stock, Discontinued Out of Stock, On Order Rare / NOS Part Restored / Remanufactured Special Order Standard Dropship Upholstery Dropship Used / Wrecking Yard Item Wanted!