What to do if your Dodge Grand Caravan headlight is not working?
Dodge Mechanic: sprinkles08, Chrysler/Dodge/Jeep master tech replied 12 years ago The first thing you will need to do is remove the headlamps. There are 3 screws that hold the unit to the body. Remove the the lamps, remove the bulbs. Using a test light test for power and ground at the bulb connectors with the lamps on.
What to do if your headlight does not come on?
It the lights do not come on, disconnect the battery, remove the front control module from the front of the integrated power module. This is the silver module that is screwed to the front of the fuse box under the hood. Check the pins of the module and in the fuse box for any signs of corrosion, clean with contact cleaner as needed.
What are the fuses on a 1999 Jeep Grand Cherokee?
Fuse box diagram Jeep Grand Cherokee 1999-2004 Cavity Fuse Description 19 10 Amp Red Antilock Brakes 20 10 Amp Red Ignition Run 21 10 Amp Red Ignition Run/Start – PDC 22 10 Amp Red Ignition Run/Start
Why are the rear lights on my car not working?
The causes for dysfunctional rear lights are: 1 Burnt bulbs 2 Blown out fuse 3 Damaged wiring 4 Electrical issues
Where is the fuse block located on a Pontiac Grand Am?
The engine compartment fuse block is located on the driver’s side of the vehicle, near the battery. WARNING: Terminal and harness assignments for individual connectors will vary depending on vehicle equipment level, model, and market.
What to do when both head lights stop working at the same time?
When that happens, the operational lifespan of your headlight capsule will be severely compromised, and the only fix is to replace the headlight assembly. When both headlights stop working at the same time, the bulbs usually aren’t at fault.
What happens when you turn on the headlights?
When you turn on your headlights, that switch activates a relay. That relay, in turn, actually provides the electrical connection between your headlight bulbs and the battery. Fuses are also involved in order to provide a sacrificial failure point to protect the rest of the wiring.
Why are the lights on my car not working?
On some vehicles, particularly those with HID headlights or solid-state circuit protection (Zener diodes or high beam circuit breakers) installing the wrong bulb might result in intermittent headlight operation or no high beams at all. The wrong bulb might not ignite at the right voltage or draw too much current for the circuit protection’s design.