Which is the correct direction to remove the fan clutch?
Directions for removing the fan clutch assembly may also be included on the vehicle’s fan shroud. Vehicles that have the water pump turning the samedirection as the crankshaft need a left hand threaded nut. These water pumps turn in a clockwise direction.
How do you remove a clutch on a Ford Fan?
Remove the large nut on the fan with the 1-1/16 wrench by turning counter clockwise. Once loose, turn the fan in the same direction and it will come right off.
Is it necessary to remove retaining nut from fan clutch?
CAUTION:For removal of the fan clutch retaining nut from the water pump, it is necessary to determine water pump rotation. This is necessary on vehicles that have the single, large fan clutch assembly retaining nut. Attempting to loosen the fan clutch assembly in the wrong direction could result in vehicle damage.
How is a fan clutch attached to a water pump?
This large nut is directly attached to the fan clutch mechanism. The water pump pulley has about 1-inch long threaded post on the end of the pulley. The nut is screwed onto the post on the water pump pulley. This requires a large wrench and a tool to lock the pulley from moving as the nut is broken loose. Remove the fan shroud.
Directions for removing the fan clutch assembly may also be included on the vehicle’s fan shroud. Vehicles that have the water pump turning the samedirection as the crankshaft need a left hand threaded nut. These water pumps turn in a clockwise direction.
Remove the large nut on the fan with the 1-1/16 wrench by turning counter clockwise. Once loose, turn the fan in the same direction and it will come right off.
CAUTION:For removal of the fan clutch retaining nut from the water pump, it is necessary to determine water pump rotation. This is necessary on vehicles that have the single, large fan clutch assembly retaining nut. Attempting to loosen the fan clutch assembly in the wrong direction could result in vehicle damage.
How do you remove a clutch from a Mercedes Benz?
To remove the fan and clutch you will need Mercedes-Benz tool # 104 589 00 01 00 or you can make one out of 6mm rod. The lower part of the tool will sit in a retaining groove, while the end of the tool sits in a hole in the pulley to hold everything while tightening or loosening the bolt (red arrow).