When do I need to replace my brake rotor?
If your rotor resembles the one in Figure 3, then it’s in need of replacement; there may also be another braking problem such as a binding brake caliper. Figure 3. This rotor is badly scored and will need to be replaced.
Where are the brake rotors on a Mercedes Benz?
Identification of the braking system components. To determine if your brake rotor is in specification, locate the minimum thickness stamp on the rotor. It may be on the front, back, or side. The spec will most likely be listed in millimeters.
How do you remove rotor from Mercedes C class?
Remove the Torx bolt. The rotor will now wiggle off the hub; pull towards you as you wiggle. If the rotor is stuck, use the mallet to break the rotor free. You will have to tap the middle section of the rotor. Figure 16. Tap the rotor at the circled areas to remove it. Installation is the reverse of the removal.
How do you remove rotors from brake pads?
Once the pads are off, remove the rotor. On many vehicles, you’ll need to remove the caliper mounting bracket in order to remove the rotor. The brake caliper bolts to the brake caliper mounting bracket which bolts to the spindle assembly. To remove the brake rotor, first remove the brake caliper and then remove the brake caliper bracket.
Why are Mercedes C230 brake rotors so good?
The precisely machined and balanced performance brake rotors for Mercedes-Benz C230 available at AutoZone promote longer brake life. They reduce vibration because they dissipate the heat that causes warping and deposits. The hot gases are vented away, and our thermal capacity withstands high temperatures.
When do you need to replace your brake rotors?
Brake rotors must meet a certain thickness requirement to be considered safe. If they are thinner than the manufacturer’s recommended thickness, then you need to replace your brake rotors immediately. Some vehicles always require new pads and rotors because the rotors cannot be resurfaced. In fact, 99% of German cars are this way.
How do you remove rotors from Mercedes Benz?
If the rotor is stuck, use the mallet to break the rotor free. You will have to tap the middle section of the rotor. Figure 16. Tap the rotor at the circled areas to remove it. Installation is the reverse of the removal. Clean the rotor and caliper by spraying it down with brake cleaner.
How to remove brake caliper brackets on Mercedes C-class?
Removal of the brake caliper brackets only requires taking off two 18mm bolts. Figure 14. The circles indicate the location of the two 18mm bolts. Remove the t27 Torx bolt (shaped like a star) from the rotor. The bolt centers and locates the rotor to the hub. The rotor should be free to be removed at this point. Figure 15. Remove the Torx bolt.