What to do if lower control arm bushing is worn out?
Chances are, you’ll be able to save this bushing by just tightening it. However, in most situations, your bushing will be worn out and you will have to replace it. Either way, you should take your vehicle to your mechanic, so they can perform this repair or replacement job for you.
How much does it cost to replace a lower control arm?
If you are replacing the arm yourself you can get an replacement arm from Amazon or the local parts store for between $44.00 and $95.00 (US) each. In this guide we show how you can not only replace the arm but replace the bushing in the arm which will save even more because the bushing only costs between $9.00 and $14.00 (US).
What to do if the bushing is incorrectly installed?
If the bushing is incorrectly installed it will tear while incorrectly performing. Look at the bushing so the flex part of the bushing is in the same location as the original. Position the lower control arm into a hydraulic press using a press cone and cup to force the bushing from the arm.
What happens when you tighten the bushing on a car?
If you tighten them all the way down w/ the control arm hanging down, it will apply a heavy binding load on the bushings when the car sets down and the control arm is pushed all the way back up to its normal position. [quote=”matthewross1987″ post=47475]Thanks so much for the input.
How much does it cost to repair lower control arm?
From our research, the average professional repair costs, including parts, will be in the $175 to $425 range. Keep in mind that this is the price for the control arm only and will not include additional parts if needed.
When should you replace bushings?
While there’s no set schedule, the bushings may wear out and need to be replaced as a vehicle approaches 100,000 miles. Driving aggressively or over rough roads can decrease the lifespan of the control arm bushings. On some vehicle models, the bushings are permanently installed in the control arms.
When do the control arms need to be replaced?
- Test drive the car on the freeway. Torn and worn out control arms or bent control arms will cause a car’s steering to vibrate.
- the control arm bushings may be worn or the arms themselves may be bent.
- Drive the vehicle around a series or corners and also pay attention to how it behaves in a straight line.
When to replace control arm?
If the control arm on a vehicle is damaged in a crash or impact with a pothole or parking block, the suspension will be out of alignment and cause uneven tire wear and poor vehicle handling. The control arm should be replaced as soon as possible.