How to remove a BMW radio head unit?
Begin by flipping open the small flap on the OEM head unit ( Figure 2 ). Underneath, you will find a funky 5-sided bolt on the inside ( Figure 3 ). I guess BMW thought it would be more difficult to remove the stereo if the bolt was a non-standard one.
How can I remove noise from my HDMI cable?
There are three methods for removing USB (and HDMI) cable noise. One is to use a cable with a ferrite noise suppressor sleeve (that big round slug at one end. You can also buy a clip-on ferrite noise suppressor).
Do you need pc99-x50 for stereo removal?
If you would like to keep steering wheel controls, you will require a PC99-x50 (plus PC99 Patch Lead) Once you have all four removal tools in, just pull the whole stereo out. Your stereo should now be free.
How to remove a non removable stereo speaker grille?
The drop of hotglue, holding the speaker wires in place, was removed with the sharp wood chisel, the broken wire spliced, soldered, and shrinktube sealed, and routed back out the back panel and secured with a generous drop of hotglue. The stereo speaker cabinet was reassembled, in reverse order.
How to remove a car radio without special tools?
There are many radios which you can remove by just a metal wire, but if you have mine type, you can just use two thin steel knifes, and if with them it is not enough you will have to use pliers as well. In video you can see Sony Xplod cdx R3350 radio, it is my Honda Accord cc7 1993 V
How do you remove a car stereo from the dash?
Now gripping the Release Keys (one in each hand), gently push them outwards (eg: the l/h side key to the left, the r/h key to the right) & gently pull forwards which should release the retaining clips & release the stereo from the dash.
How to remove a car stereo using release key tools?
All Aftermarket Car Stereo’s when fitted with thier cage surround will release from the vehicle using ‘Car Stereo Removal Release Key Tools’.
Is it hard to remove a radio wire?
Well it is not that hard if you have right tools. There are many radios which you can remove by just a metal wire, but if you have mine type, you can just use two thin steel knifes, and if with them it is not enough you will have to use pliers as well.