How do you lift the seat on a Mercedes?
Tilt the seat to the side and slide it out the door. The top portion will require a socket wrench to loosen the bolt holding it down. The bolt will be located at the bottom center of the seat, and once it is loosened the seat will be ready to lift out.
Where are the bolts on the back of a Mercedes?
Slide the seat all the way forward to access the bolts to the back of the seat. The seat has four bolts that brace it to the floorboard. The bolts are located at each corner of the seat. Unscrew the back two bolts with a socket wrench. The seat will now need to be slid all the way back to access the front bolts.
How are the front seats on a Mercedes Benz secured?
The seats are bolted down with five bolts each. You should use a matching Torx wrench, as the bolts are secured with threadlock. One bolt in each rail in the front – you’ll see them when you move the seat back. One bolt in the rear of the inside rail, and two bolts in the rear of the outside rail.
How do you remove the back seat in a Mercedes?
Bucket seats in certain Mercedes models are removed the same way. The back seat in the crossover and sport utility vehicles will have detailed instructions in the owners manual for removing the back seat for extra room. Slide the seat all the way forward to access the bolts to the back of the seat.
Can a socket wrench be used to remove a Mercedes seat?
Mercedes Seat Removal. The seats in a Mercedes are bolted to the floorboard, and with a socket wrench it will only take a very short amount of time to remove them. The back seat is simpler to remove as it just sits in place. The back portion is held on by clips and this makes the seat removal a quick and simple process.
The seats are bolted down with five bolts each. You should use a matching Torx wrench, as the bolts are secured with threadlock. One bolt in each rail in the front – you’ll see them when you move the seat back. One bolt in the rear of the inside rail, and two bolts in the rear of the outside rail.
Do you need to remove the seats in a Mercedes Sprinter?
Under the drivers seat, there are a fair amount of electronics that are connected to the pedestals that we did not need to remove. Removing the seats allowed us to access the areas we needed to clean just fine. Remove the 4 bolts that connect the base of the seat to the pedestal.
What kind of bolt head does Mercedes Benz use?
Instead of using hexagonal bolt head, Mercedes-Benz uses female Torx star head for optimum torque transfer. Whether they used them because the E-Torx bolt heads look sophisticated or to deter you from fixing your car, we don’t know. ? You will find that many bolts on your Mercedes-Benz will require you use Female E Torx Star Socket Set.
What kind of wrench do you use to move a car seat back?
You should use a matching Torx wrench, as the bolts are secured with threadlock. One bolt in each rail in the front – you’ll see them when you move the seat back. One bolt in the rear of the inside rail, and two bolts in the rear of the outside rail. Move the seat forward all the way to get to them.