Why is the fan on my Mercedes C230 not working?
Rebuilt Blower/runs hot wired to battery Checked fuses/relay New Cilmate control unit Used Resitor Pik n pull said it w … read more I have a “coolant visit workshop ” message on my 2006 mb c230 sport, I checked my coolant level, it is ok, but my fan seems to work only when the engine is cool.
Why is the cd220 displaying a warning ” coolant, VISIT WORKSHOP “?
Why is the CD220 displaying a warning “Coolant, visit workshop” though no Mercedes coolant is leaking nor is the car overheating? The Mercedes Benz coolant warning light is a warning also meant for the cooling fan. Hence it is possible the fault could be with the fan system.
Can you use universal coolant on a Mercedes Benz?
There may be universal coolants available to use, you may want to know which specific Mercedes Benz coolant should be used for your car. Apart from this warning lights, leakage, and engine problems can be a result of Mercedes coolant system problems and a wrong diagnosis or delay in repair can be detrimental.
Can you use green coolant on a Mercedes C320?
Green coolant should not be used unless green coolant has originally been flushed. Mixing coolants can result in them gelling up together. How can Mercedes coolant be successfully changed on the C320 (2001 model)?
How to get the coolant VISIT WORKSHOP message?
It comes with the fan assy. You need to test if the fan is operating. Run the car to get the engine up to temp. Then stop leave engine running and the fan should start. If it doesn’t. Then that is your issue. I posted earlier about my message ‘Coolant visit workshop’ I only get this code when I use the A/C.
Why does my C200 2005 say coolant VISIT WORKSHOP?
My c200 2005 is giving the ‘coolant visit workshop’ message whenever I switch off my A/C. It has done this twice now, I drove it home yesterday without the A/C on and the alarm never came on. Driving to work, I monitored the engine temp, it went to about 80C.
Where can I get a free workshop manual for C200?
Anyone know where I can obtain a ‘free’ workshop manual for a C200, W203 ?? 1) The fan control unit. 2) The engine temp sensor. 3) The coolant level sensor. If short on funds then get it on a STAR with a good Indie. That will be cheaper then swapping parts in te hope that you hit the jackpot first swap.
Where can I get coolant for my engine?
1) The fan control unit. 2) The engine temp sensor. 3) The coolant level sensor. If short on funds then get it on a STAR with a good Indie. That will be cheaper then swapping parts in te hope that you hit the jackpot first swap.
What’s the error code on the Mercedes C230?
WDBRF52H76A878127 has M272 engine #253159, which is within the affected range. Those are the tell-tale error codes. Basically, the main gear driving your timing chain is stretching so that the chain is running “behind” where the ECU expects it to be.
Is there a recall on a 2007 C230?
There was no official “recall” on this. A TSB is just a bulletin to let the mechanics know of difficult to diagnose chronic problems. TO repair this requires removing the engine and it costs over $4K at dealer rates.
Is the cooling fan on my C240 4 MATIC working?
My 2004 C240 4 matic cooling fan runs at high speed at all times when the engine is running. As far as I can tell the coolant sensor is Ok and the Module is ok,it is setting a P0273 code. There are no … read more
Do you have a problem with your C230?
I had a similar problem with my c230 although earlier year. It did turn out to be a problem with the key in the end. You may want to start at the simplest point and move forward from there. Let me know what happens. It would sound like your engine chatter was directly related to you a/c problem.
Rebuilt Blower/runs hot wired to battery Checked fuses/relay New Cilmate control unit Used Resitor Pik n pull said it w … read more I have a “coolant visit workshop ” message on my 2006 mb c230 sport, I checked my coolant level, it is ok, but my fan seems to work only when the engine is cool.
What do you need to know about Mercedes C230 drive cycle?
Follow the Mercedes Benz C230 Drive Cycle below to complete all monitors, including the Secondary Air Injection Monitor. If you have a scan tool, check the Air Injection Monitor after completing the requires Air Injection Drive Cycle step (Step 1).
What should coolant temperature be on Mercedes C230?
In order to be classified as a cold start the engine coolant temperature must be below 122°F and within 11°F of the ambient air temperature. Follow the Mercedes Benz C230 Drive Cycle below to complete all monitors, including the Secondary Air Injection Monitor.