How do you fit a belt on a Mercedes Sprinter 311?
The belts should be the exact-same size. If not, you’ll need to consult an auto parts shop and purchase a belt that will fit your engine. Open the bonnet of your Sprinter 311 and prop it open. Look to the side of the engine where the previous belt came out. You’ll see a series of pulleys which serve as points of connection for the belt.
When to put new fan belt on Mercedes Sprinter?
Install the new belt following the same pattern as you or your technician did with the old. Your new fan belt should go in as soon as you remove the old one. A correctly-working belt draws in air, allowing the engine to cool and saving you from an overheated engine. Compare the old belt with the new one to make sure it’s the same size.
How to remove the sprung belt tensioner on a sprinter?
The removal of the large idler pulley will reveal the two small fixings that hold the sprung belt tensioner. These are smaller, reverse socket head fixings and although you really do need a special set of sockets an 8mm multipoint deep socket is about the correct length for best removal.
How to draw a Mercedes Sprinter van Diagram?
2.1 Mercedes Sprinter van diagram for the serpentine belt 2.1 2.12. Clicking this will make more experts see the question and we will remind you when it gets answered. You can’t post conmments that contain an email address.
The belts should be the exact-same size. If not, you’ll need to consult an auto parts shop and purchase a belt that will fit your engine. Open the bonnet of your Sprinter 311 and prop it open. Look to the side of the engine where the previous belt came out. You’ll see a series of pulleys which serve as points of connection for the belt.
Install the new belt following the same pattern as you or your technician did with the old. Your new fan belt should go in as soon as you remove the old one. A correctly-working belt draws in air, allowing the engine to cool and saving you from an overheated engine. Compare the old belt with the new one to make sure it’s the same size.
What causes the Mercedes Sprinter airbag warning light to stay on?
Running the engine with low coolant level may cause the engine to overheat, resulting in damage. Stop as soon as possible, switch off the ignition to allow the engine to cool, then add coolant. Description: The Mercedes Sprinter airbag warning light stays on when a fault has been detected with the airbag system.
How do you remove an auxiliary drive belt?
Firstly take off the long top turbo hose to the inlet manifold this gives slightly improved access for working, then remove the auxiliary drive belt by scooting underneath the front and using a 17mm ring spanner on the tensioner arm to relieve the belt, slipping it forwards off the crank pulley.