What happens when GMC Yukon engine shuts off?

What happens when GMC Yukon engine shuts off?

Loss of brakes and power steering occurs after engine shuts off. This has happened on several occasions at varying speeds. Speed varying between 30 mph to 70 mph. Engine will restart (be turned back on after wait time at the ignition) and drive following these incidents, however incidents reoccur.

How to tell if your Yukon alternator is going bad?

Start the Yukon and pay close attention to the sound of the engine as it turns over. If the engine struggles more than usual or takes a long time to start, it’s a sign that the alternator could be going bad.

Why are my GMC Yukon brakes not working?

Vehicle brakes would not operate properly, increased braking effort and message displayed on instrument cluster �service brake system�. This is the 4th time a beake issue has been experienced with a gm suburban/yukon vehicle. First 3 were on our 2017 Chevrolet suburban premier.

What was the problem with my 2001 Yukon XL Denali?

I love my 2001 Yukon xl Denali with over 130,000 miles but having some starting problems. The initial problem was taking several tries to start, when after it seemed a clog was cleared and the engine banged loudly once it would clear and start and be ok for the rest of the day, but a little more difficult in colder weather.

How to disable start stop on GMC Yukon?

Make it routine. Start car disable start stop. Put in gear and go. Click to expand… Not a big deal, just wondering if there was a ready to go solution yet. To be honest, the more I drive it I’ve realized I barely noticed it.

Can a GMC Yukon stop at a red light?

I found that if you press on the brake pedal really lightly, the engine doesn’t stop. It took a bit of practice, but now I can modulate the brakes so that I stop or not stop the engine at will — e.g. depending on how long I estimate the red light to stay — it’s pretty cool actually. PG01 likes this.

I love my 2001 Yukon xl Denali with over 130,000 miles but having some starting problems. The initial problem was taking several tries to start, when after it seemed a clog was cleared and the engine banged loudly once it would clear and start and be ok for the rest of the day, but a little more difficult in colder weather.

How to turn off back seat reminder on GMC Yukon?

Click to expand… Back seat reminder can be turned off in the settings menu. I just saw a YouTube video with an easy way to automaticity stop this feature on Fords. Go to 3:15 on the video. Someone please try this on your new GM truck and let us know if it works.

What’s the average speed of a GMC Yukon?

Speed varying between 30 mph to 70 mph. Engine will restart (be turned back on after wait time at the ignition) and drive following these incidents, however incidents reoccur. Also upon taking it to a GMC Chevrolet dealership for inspection, service department was unable to find any “codes” related to this.

When did GMC Yukon engine shut down while driving?

In January 2010, the dealer replaced the throttle body assembly. The current and failure mileages were approximately 115,000. Engine shuts down while driving: I have a Yukon xl 2002. Over the past 6 months the engine would suddenly shut down while the car is being driven. It has occurred at high speed and at low speed.

What kind of engine does a 99 Yukon have?

My 99 Yukon with Vortec 5.7L suddenly won’t run. It cranks over fine, starts in about 1 second (normal), but then dies 2-3 seconds later. Giving it a little bit of throttle while starting doesn’t make any difference.

What to do if your GMC Yukon won’t start?

No matter what I do… take the battery cable off, pull and replace fuses… etc, it just will not start However, if you wait exactly 15 minutes, it will start perfectly fine. Somebody suggested to me that the security system was kicking in and shutting off the ignition coil until it automatically cleared after 15 minutes.

Vehicle brakes would not operate properly, increased braking effort and message displayed on instrument cluster �service brake system�. This is the 4th time a beake issue has been experienced with a gm suburban/yukon vehicle. First 3 were on our 2017 Chevrolet suburban premier.