Where is the flap on the ML320 ml430?
Open the glove box and you will see the four screws that hold it in place. Once you remove the screws pull out the glove box. Behind the glove box (on the left) you will see a white plastic arm. This is the flap that switches the air flow from hot to cold. It gets stuck in HOT position.
Why is there no heat in my Mercedes ML320?
Description: Trouble shoot an air conditioner and heater control in a Mercedes ML 320. Sometimes it’s just the airflow door motor that’s fried and is not opening the small door that directs the Hot or Cold air out the vents. You have to remove your dash to get to it, or…try this Loading…
How to recharge air conditioner ML320 W163 1998?
Open the hood of your ML320 W163 and locate the low-pressure AC service port and remove the cap. Attach the refrigerant gauge to the service port. You will need to press and hold the quick-release at the end of the hose, insert it on the AC charging port then release it. Read the pressure in your air conditioner system.
Where is the accelerator pedal sensor on the ML320?
This 01 ML320 was going into reduced power mode aka limp home mode due to a problem with the accelerator pedal position sensor. Code P0120 was set. The sensor is located on the firewall and actuated by a cable from the accelerator pedal. Loading…
Why is my ML320 blowing hot air only?
A common problem with the ML320 / ML430 is the AC getting stuck on Hot or Cold setting. This is caused by the blend motor flap getting stuck and no longer moving when you rotate the AC knob between Hot and Cold. You can manually switch the blend motor flap if you remove the glove box.
What are the most common problems with Mercedes Benz ML320?
The number one most common problem is related to the vehicle’s steering (148 problems). The second most common problem is related to the vehicle’s service brakes, hydraulic (133 problems). Table 2. Common problems of Mercedes Benz ML320
Open the glove box and you will see the four screws that hold it in place. Once you remove the screws pull out the glove box. Behind the glove box (on the left) you will see a white plastic arm. This is the flap that switches the air flow from hot to cold. It gets stuck in HOT position.
A common problem with the ML320 / ML430 is the AC getting stuck on Hot or Cold setting. This is caused by the blend motor flap getting stuck and no longer moving when you rotate the AC knob between Hot and Cold. You can manually switch the blend motor flap if you remove the glove box.
Are there any Mercedes-Benz ML 320s for sale?
Due to nationwide inventory shortages, we were unable to find more matches within 0 miles. Try changing your search criteria or remove filters. Anything catch your eye? Autotrader has 6 Used Mercedes-Benz ML 320 cars for sale.