Can you change the side marker on a Mercedes Benz?
As many Mercedes-Benz E-Class owners agree, those standard side markers could sure use a makeover. There are several different options that can be used to replace the side marker color on the bumper. For those interested, smoked or clear housings can be installed to better blend with the color of the car.
How do you change a side marker light?
In order to change the bulb, the side marker light will need to be carefully removed. Use electrical tape and cover areas around edge of trim. Using awl or narrow flat blade screw driver, pry on outer edge to lift the side marker up.
How do you remove a side marker housing?
Push on the tab and release it. Once the housing is broken free, angle it to get the other tab off. Holding the backing plate in place, remove the side marker housing. The backing plate will be loosely hanging, so be sure to use a zip tie to keep it temporarily secured in place.
Where are the side markers on a car?
The side markers are found behind the plastic trim on the wheel well. Turn the wheel inwards on each side of the car you’re working on. For the driver-side, turn the wheel all the way right, and for the passenger-side, turn the wheel all the way left. Figure 1. Driver’s side wheel turned right. Locate the clips found on the wheel liner.
Where are the side markers on a Mercedes Benz?
Some vehicles, like the Mercedes-Benz E-Class and E-Class AMG, are equipped with “side marker” lights. These lights are typically affixed to the side of the fender or near the wheel well. They often illuminate when the headlights are turned to the “on” position.
In order to change the bulb, the side marker light will need to be carefully removed. Use electrical tape and cover areas around edge of trim. Using awl or narrow flat blade screw driver, pry on outer edge to lift the side marker up.
Where are the side lights on a Mercedes Benz?
They are located on both the front and rear of your vehicle on the sides. These serve as safety lights that are able to be seen by others on the road when you turn on your headlights. They provide extra illumination for when there is poor visibility or if you’re driving at night.
When do side market lights need to be replaced?
They became a requirement on vehicles in the United States starting in 1968. Over time, the side market lights might need to be replaced. Lights are going to wear out over time and the bulbs might eventually burn out or dim. The lights can also become damaged in an accident.
How do you replace a side marker bulb?
Preparing to replace the side marker bulb. The harness is usually a twist and pull type of action to disconnect from the assembly. Now that the assembly is out, the bulb can be replaced. Installation is reverse of removal. Remove and discard old bulb. Replace new bulb. Attach harness to side marker housing. Insert two prongs on leading edge first.
As many Mercedes-Benz E-Class owners agree, those standard side markers could sure use a makeover. There are several different options that can be used to replace the side marker color on the bumper. For those interested, smoked or clear housings can be installed to better blend with the color of the car.
The side markers are found behind the plastic trim on the wheel well. Turn the wheel inwards on each side of the car you’re working on. For the driver-side, turn the wheel all the way right, and for the passenger-side, turn the wheel all the way left. Figure 1. Driver’s side wheel turned right. Locate the clips found on the wheel liner.
What’s the best way to remove a marker?
Using awl or narrow flat blade screw driver, pry on outer edge to lift the side marker up. Figure 1. Pry the cover off. Covering the screwdriver with either microfiber cloth or applying the tape directly to the tip works as well.