At what temp should radiator fan turn on?
about 200 degrees Fahrenheit
Your radiator fan should kick in at about 200 degrees Fahrenheit. If you notice your vehicle is overheating or at the very least running hotter than it normally does, listen for the fan to see if you can hear it.
Why is my Mercedes radiator cooling fan not working?
This feature is not available right now. Please try again later. This is a very common problem with the Mercedes radiator cooling fan running constantly on high speed. The problem in most cases is a bad ecm so in order to fix it the ecm will have to be replaced and programmed to work with your vehicle. Check the mass airflow sensor first.
How to troubleshoot your Mercedes Benz air conditioner?
Identify the location of your compressor. Look at the pullyer and you should be able to see if it spining or not. The engine running turn the A/C on max cool, set fans high, and make sure that the clutch is engaging on the compressor. The pulley spins any time the engine is running. The center part of the A/C pulley only engages when the A/C is on.
How can I tell if my radiator fan is working?
When a radiator fan works it usually makes a whirring sound that is easily noticeable. However, the radiator fan does not always start spinning on ignition. The ECU signals the radiator fan to work at the precise time. So, do not worry if the fan doesn’t immediately start working. Visually check the fan if you don’t hear its noise. 1. Broken Fuse
Why does my air conditioner spin when the engine is running?
The pulley spins any time the engine is running. The center part of the A/C pulley only engages when the A/C is on. If the clutch is engaging and disengaging rapidly, the refrigerant may be low. Locate the Low Pressure A/C recharge port.
Why is the radiator fan not working on a Volkswagen Jetta?
If your Jetta has a bad engine temp sensor the radiator fan won’t know to come on, because the ECU won’t know how hot the engine is. You’ll need to locate and test the engine temp sensor. Depending on the model year and engine, the location varies.
When do you turn on the a / C on a VW?
When the A/C is switched on and the blower motor is running at any speed, verify that 12 volts from the A/C switch in the instrument panel is available to pin T14/8 (blue/red). Note: The cooling fans should run at low speed whenever the A/C is switched on.
Where is the fan control module on a VW?
The fan control module is located under the radiator and has two connectors: a 14-pin (T14) and a 4-pin (T4). 2. Check for 12 volts to pin T4a/1 (red/black) and T4a/3 (red) via fuses S164 and S180 respectively, in the fuse box on top of the battery, at all times.
Why is my radiator fan not turning on?
Although the fan itself can go bad, that’s definitely not the place to start a diagnosis. Here are the most common reasons that your radiator fan does not turn on: Before poking your hands around your fan, make sure to treat it like it still could come on, and and keep your hands out of its path.