What causes Silverado to have intermittent no crank?
I’ll be honest with you, finding the cause of a Silverado intermittent no crank condition is no fun. It’s a complicate these that involves multiple switches and three computers. All the signals have to line up before the Electronic Control Module (ECM) will ground the starter relay.
How to know if your engine has no spark?
First Confirm Your Engine Has No Spark. 1 Disable the fuel system by removing the fuel pump fuse or relay. 2 Insert a spark plug tester into the plug boot and ground it on a piece of metal on the engine. 3 Finally, Have someone crank the engine and watch for spark.
Why does my car not start when I crank the engine?
The crankshaft position (CKP) sensor monitors the position or rotational speed of the crankshaft. If the crankshaft position sensor has failed completely, and isn’t sending a signal to the (ECU) at all, then the computer won’t send any fuel to the injectors. This will leave you unable to start the car.
Can a bad ignition pickup cause an engine to stall?
One of the first symptoms of a bad ignition pickup is an engine that stalls and eventually will not restart. Consequently, An old or failing ignition pickup may cut out signal intermittently, which may cause the engine to stall. The engine may suddenly just shut off, almost as if the key had been turned off.
First Confirm Your Engine Has No Spark. 1 Disable the fuel system by removing the fuel pump fuse or relay. 2 Insert a spark plug tester into the plug boot and ground it on a piece of metal on the engine. 3 Finally, Have someone crank the engine and watch for spark.
One of the first symptoms of a bad ignition pickup is an engine that stalls and eventually will not restart. Consequently, An old or failing ignition pickup may cut out signal intermittently, which may cause the engine to stall. The engine may suddenly just shut off, almost as if the key had been turned off.
The crankshaft position (CKP) sensor monitors the position or rotational speed of the crankshaft. If the crankshaft position sensor has failed completely, and isn’t sending a signal to the (ECU) at all, then the computer won’t send any fuel to the injectors. This will leave you unable to start the car.
Where is the spark in an ignition system?
Electronic ignition pickups are a component found on traditional electronic distributor ignition systems. They are located inside the distributor and function as the trigger for the ignition system to produce spark. The pickup coil monitors the rotation of the distributor and triggers the ignition system.