How to check car ignition switch?
Put the ignition key into the ignition switch and crank the engine. If the engine cranks, then your ignition switch is obviously working fine. If the engine does not crank, and you hear a “click” when you first turn the key to the “III” position, then your ignition switch is not the problem.
How to test if the ignition switch is bad?
Turn the ignition key to the RUN position and measure the voltage using the multimeter. If your multimeter reads less than 90% of the battery’s voltage, it is an indication that you have a faulty ignition switch.
How do you remove the ignition switch from a Mercedes?
Remove the two 13 mm bolts on top of the steering column. This will allow the steering column to drop down roughly 3 inches so that you can access the release button for the ignition switch. Press the release button on the steering column where the ignition cylinder enters the column.
Where is the ignition plug on a Mercedes?
Turn the ignition key to the “I” position and remove the electrical plug in the back of the ignition switch. The switch should be exposed now that the cowl and instrument cluster have been removed. You will access the plug from the top of the ignition switch and cylinder assembly.
Do you need to re-cut the ignition key on a Mercedes?
Because newer Mercedes models also use laser-cut transponder keys, you may need to have your ignition key re-cut or reprogrammed depending on the model of Mercedes you have. The first step, of course, is to remove the old ignition switch.
How to replace the ignition switch on a Mercedes C320?
Click here to order! This article will show you how to replace the electronic ignition switch in your Mercedes C320. NOTE: The switch is included under Mercedes-Benz “theft- relevant parts program” and must be ordered VIN specific and reprogrammed by a dealership.
How to remove the ignition switch ( Eis ) from your Mercedes vehicle?
How to remove the Electronic Ignition Switch (EIS) from your Mercedes vehicle Removing the Electronic Ignition Switch (EIS) from your Mercedes-Benz is not a difficult process at all. You can have your EIS / EZS removed in less than 5 minutes. Removing the Electronic Ignition Switch (EIS) from your Mercedes-Benz is not a difficult process at all.
How do you remove an ignition switch from a car?
With some manual skills, a bit of patience and just a screwdriver, you can also have your EIS / EZS removed from your vehicle in less than 5 minutes. All you need is to do is removing the outer ring from the ignition switch, turning it anti-clockwise with the help of a screwdriver, and then pull the EIS from the inside of the dashboard.
Turn the ignition key to the “I” position and remove the electrical plug in the back of the ignition switch. The switch should be exposed now that the cowl and instrument cluster have been removed. You will access the plug from the top of the ignition switch and cylinder assembly.