How do you recover an air conditioner expansion valve?

Step 2 Recover the refrigerant. You can connect the recovery system directly to the car, or connect it via the manifold gauges. Refrigerant is recovered using the low pressure port on the system. Open the valve on the storage tank, turn on the switch and let the machine chug away until it sounds an alarm.

When to replace an A / C receiver drier?

Receiver/driers are used in expansion valve equipped A/C systems. It is the job of the receiver/drier to protect the rest of the A/C system against moisture damage. The desiccant bag can only hold a finite amount of moisture. If too much water gets into the system, the receiver/drier should be replaced.

How much does it cost to replace an expansion valve?

At this point, you will need to replace your A/C expansion valve to fix the problem. The replacement cost of an A/C expansion valve is anywhere from $200 to $450. The parts cost itself will be between $100 and $200 while the labor costs will be between $100 and $300.

What happens when your a / C expansion valve goes bad?

You will notice when the A/C expansion valve goes bad because your air conditioning system will ultimately stop functioning properly. It will either produce less cool air or it won’t produce any cool air at all. At this point, you will need to replace your A/C expansion valve to fix the problem.

Where do you put an expansion valve in an evaporator?

Install the new expansion valve, the tapered end with an o ring should go in toward the evaporator coils. Check to see if the o ring in the refrigerant line coupling is still in good condition, then reattach the fittings that connect this pipe.

Do you have to take frigin dash off to replace expansion valve?

You have to take the frigin dash off in order to replace it!!! So, since it appears that there is nothing internally wrong with the a/c, do I really need to replace the expansion valve? NO !!! you do not. There are ways to troubleshoot expansion valves, look on youtube.

Navigation