How to connect a relay for car reverse camera installation?
Connect pin 30 (blue wire) to battery power source. Pin 87 (red wire) goes to camera power wire leading to head unit. Pin 85 (white wire) goes to reversing light power wire. Pin 86 (Black wire) to ground. Thanks our customer Gregory Davis who provided the above photo from USA. He solved the camera unstable issue by connected a relay.
How to connect a camera to a backup light?
Connect the positive and negative power provide wire of backup camera installation with the positive and negative leads of Backup lightweight (Backup Light). When the backup lightweight activates, the backup camera activatesfurthermore. Note: don’t connect the ability provide wire of backup camera with visual signal or Tail lightweight. 2.
Where does the backup light feed go on a reverse camera?
Backup light feed should go to pin 86 of the relay. Pin 85 will go to ground. Pin 30 should be brought back to battery positive, preferably at the battery positive post or the PDM. Pin 87 will be the camera input voltage. You can use a standard automotive relay (4 pin) and preferably with a suppression diode across the coil.
Can a radio switch into backup camera mode?
If the radio cannot switch into backup camera input mode mechanically once the backup lightweight is on, please check the barge between the police investigation lead and trigger wire or the matter that the trigger wire broken some elements. The backup camera installation guidelines discussed above do not apply to video based systems.
Connect pin 30 (blue wire) to battery power source. Pin 87 (red wire) goes to camera power wire leading to head unit. Pin 85 (white wire) goes to reversing light power wire. Pin 86 (Black wire) to ground. Thanks our customer Gregory Davis who provided the above photo from USA. He solved the camera unstable issue by connected a relay.
Connect the positive and negative power provide wire of backup camera installation with the positive and negative leads of Backup lightweight (Backup Light). When the backup lightweight activates, the backup camera activatesfurthermore. Note: don’t connect the ability provide wire of backup camera with visual signal or Tail lightweight. 2.
If the radio cannot switch into backup camera input mode mechanically once the backup lightweight is on, please check the barge between the police investigation lead and trigger wire or the matter that the trigger wire broken some elements. The backup camera installation guidelines discussed above do not apply to video based systems.
Backup light feed should go to pin 86 of the relay. Pin 85 will go to ground. Pin 30 should be brought back to battery positive, preferably at the battery positive post or the PDM. Pin 87 will be the camera input voltage. You can use a standard automotive relay (4 pin) and preferably with a suppression diode across the coil.