How do you change a tire on a Mercedes A Class?
Instructions
- Park your car in a flat, dry place so you can jack the car up easier.
- Move the shifter into “Park,” pull the parking hand brake and turn on your hazard lights.
- Open the trunk of the car.
- Using your lug wrench, loosen the lug nuts on the flat tire.
- Locate the jacking points on your Mercedes.
Can you change a flat tire on a Mercedes C class?
Regardless, every driver should know how to change a flat tire, especially those of you who own a Mercedes-Benz C-Class. With a tire changing kit that comes standard with your Mercedes, the process of replacing your tire is both easy and convenient. Read below for the appropriate steps to change a flat tire per your C-Class owner’s manual.
What happens when you change a tire on a Mercedes Benz?
Over time the lug nuts may corrode or simply refuse to come off. The lug nut wrench that Mercedes installs on these cars is inadequate to loosen these lug nuts and in can bend easily. Here is a lug nut wrench that got bent when we were trying to change a Mercedes-Benz tire.
How do you put a spare tire on a Mercedes?
Push it on straight with the lug nuts holes aligned until it cannot go any further. Put the lug nuts on the spare tire and screw them in loosely just so they are attached and the spare tire stays on the car. Lower the Mercedes to the ground by cranking the jack counter-clockwise and remove the jack from underneath the car.
Where is the tire jack on a Mercedes C class?
These are located right behind the front wheels, and right in front of the rear wheels. Look for the plastic square cutout, and use a flat head screwdriver to pop off the plastic cover. Then, insert the jack saddle into the support tube, and make sure the base of the jack is securely grounded.
Regardless, every driver should know how to change a flat tire, especially those of you who own a Mercedes-Benz C-Class. With a tire changing kit that comes standard with your Mercedes, the process of replacing your tire is both easy and convenient. Read below for the appropriate steps to change a flat tire per your C-Class owner’s manual.
Over time the lug nuts may corrode or simply refuse to come off. The lug nut wrench that Mercedes installs on these cars is inadequate to loosen these lug nuts and in can bend easily. Here is a lug nut wrench that got bent when we were trying to change a Mercedes-Benz tire.
Push it on straight with the lug nuts holes aligned until it cannot go any further. Put the lug nuts on the spare tire and screw them in loosely just so they are attached and the spare tire stays on the car. Lower the Mercedes to the ground by cranking the jack counter-clockwise and remove the jack from underneath the car.
Where do you put the tire jack on a Mercedes?
Do not remove the lug, only loosen them about one turn. Place the jack under the car and raise the Mercedes until the tire is about 1 1/2 inches off the ground. If you look under the car you will see a flat area where your jack will fit. If you are changing a front tire, the jack point will be behind the inner part of the tire.