How does the p0016 crankshaft position sensor work?
P0016 Description. The Crankshaft Position (CKP) sensor is a permanent magnet generator, known as a variable reluctance sensor. The magnetic field of the sensor is altered by a crankshaft mounted reluctor wheel that has seven machined slots, 6 of which are equally spaced 60 degrees apart.
What does the OBD code p0016 mean?
P0016 code definition Camshaft Position A – Camshaft Position Correlation (Bank 1) What the P0016 code means P0016 is the OBD-II generic code indicating that the camshaft position sensor for bank 1 does not correlate to the signal from the crankshaft position sensor.
Why do I get an error code p0016 on my camshaft?
If the timing chain and guides have been identified as problematic, they should also be replaced. The error code P0016 can be flagged intermittently if there’s a problem causing excess vibration or heat. It can be challenging to verify these issues, so if they cannot be confirmed then you should consider replacing the camshaft sensor.
When does p0016 occur in an Opel Corsa?
P0016 is know to occur in the Opel Corsa when the Crankshaft Position Sensor and the Camshaft Position Sensor are out of alignment by a certain number of degrees, or if there is a sensor issue. We’ll explore the symptoms and causes directly below.
What is a bad crank sensor?
A bad crank position sensor can worsen the way the engine idles, or the acceleration behaviour. If the engine is revved up with a bad or faulty sensor, it may cause misfiring, motor vibration or backfires. Acceleration might be hesitant, and abnormal shaking during engine idle might occur.
Where is the crankshaft sensor located?
Crankshaft sensors are located in the crank pulley, flywheel, camshaft or directly on the crankshaft. Crankshaft position sensors, which ensure that the vehicle starts and remains running, are one of the most important components of an engine.
How much to replace a camshaft sensor?
Additional costs will be for the other engine parts that will support the camshaft and engine. A camshaft position sensor, which may be needed or replaced, can can cost $100 to $350 for the part.
What does a cam position sensor do?
The CAM sensor or camshaft position sensor’s role is to signal the ECM the camshaft position. The crank and cam sensor operates in sync with eachother. The CAM sensor is frequently used in determining which injector to fire in a sequential system and for the COP or coil on-plug ignition systems coil firing event.