How is the charge code mapped to the general ledger?
An identifier that maps the charge code to the general ledger. A subcategory allows you to group products more precisely within a larger category and assign different taxes to each subcategory. For example, Appetizers can be a subcategory of the category Food. Date the charge code becomes active.
How are charge codes used in a category?
Charge codes are associated with subcategories, rather than categories, and can be used for calculation and analysis purposes. When defining charge codes, the category field is automatically populated when the subcategory field is specified.
What should I do if my power bank is not charging?
Bring it to a local recycling center that has a dedicated service for processing batteries. Always use the cable supplied by the vendor or any other short length good quality USB cable. Avoid charging the mobile phone with the power bank while loading your power bank from a power outlet at the same time.
Where do I find the charge code form?
To define a charge code. From the application-level menu, choose View > Site Map > Tax Administration > Charge Codes. In the More Info form, click New, and provide information for the fields.
When does the charging system warning light come on?
Charging System Warning Light Charging System Warning Light The charging system warning light comes on when there is a problem with the electrical charging system or when the igni- tion switch is turned on with the engine not running. If the light comes on while driving, stop and check to see if the alternator belt is loose or broken.
When does the power management system go into charge mode?
The power management system has 6 modes of operation Battery Sulfation Mode -determines the correct charge protocol to correct plate sulfation condition. The BCM enters this mode if the alternator output voltage is less than 13.2 V for 45 minutes. The BCM will enters Charge Mode for 2-3 minutes.
What should the refrigerant charge be on a 410A?
For 410a this should be around 16-18 degrees F. For R22 it may be around 17-21 degrees F. A delta T reading may not be the most accurate way to measure a charge in a system, but it should help deciding whether you should hook up your gauges or not.