How do you remove a lock from a mortise door?
To extract the lock mechanism from a tight mortise hole, place a small screw driver through the hole where the spindle was and gently push forward to free the lock face from the wood. Step 9: Remove the Lock Case From the Door. The lock mechanism should come freely out of the door.
When to take clamp off sliding door screen?
Not too tight or the tension in the cloth will bend or bow the frame. When you come to a corner you will need to remove the clamp at that corner just before rolling the material in.
What to do if your mortise door knobs slip?
If you have an older house with knobs that slip, latches that are stuck inside the door, or other minor problems, then you should follow these instructions to remove the lock, dis-assemble it, clean and perform minor repairs. Step 1: Meet the Mortise Lock and Door Knobs.
What’s the best way to clean a brass door lock?
Use a vise to hold the case body so you can clean the face, but do not over-tighten the vise or clamp directly to the brass face, or you will damage your lock. Step 16: Polish the Brass Lock Face.
How much is apdty door check strap stop front left?
Quick and easy install and was about $10-$15 cheaper than the auto parts stores around my house! This unit is for front doors! The directions on use are not very well explained. This unit is for the front door left or right being the shorter rod. Otherwise the unit looks an feels top quality with easy installation.
Can a replacement door check be sent back to the supplier?
First, the replacement part must enjoy compatibility with your vehicle. Otherwise, ordering the new door check only to send it back to the car parts supplier for the proper part will waste your time and possibly your money if you don’t get a refund.
How does a door check extend the life of a car?
Door checks extend the lifespan of the car doors and associated parts. These parts include the door hinges that connect the door to the vehicle and the other components inside the door like the door latch that may get affected by the forceful impact of slamming the door close. A faulty door check won’t work as effectively as it should.
When does a door check go into action?
The door check goes into action whenever you close the door or open it to the fullest. When it acts as a brake, it decelerates the door as the latter approaches the vehicle. By slowing the door down right before it comes into physical contact, the door brake reduces the force imparted upon the door and the rest of the vehicle.